We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
Explore our diverse range of jockey wheel brackets and parts. With high-quality products and accessories from leading industry brands like Navigator and AL-KO, reliability and performance are guaranteed. Boost your setup's sturdiness with our quality offerings and find the perfect part for your vehicle, whether that's a bearing kit, U-bolt or jockey wheel handle. Explore the range below.
Includes:
1 x HR30210J Cup
1 x 15245 Cup
1 x HR30210J Cone
1 x 15123 Cone
1 x Grease Cap
1 x Seal
The Navigator Jockey Wheel & Chock Buddy comes in two sizes - small or large! No more jockey wheels rolling around in your tunnel boot or cab - keep all your gear safe and protected with the best caravan gear on the market!
LARGE - Made to fit a jockey wheel to the maximum length of 85cm and width 30cm
FEATURES
- Allows storage for your wheel chocks and jack stand winder
- Made to fit a "Trail a Mate" hydraulic jack
- Features soft padded lining to help protect the interior of your tunnel boot and items within it
- Large strong zipper allows easy access
- Durable outer fabric
- Webbing carry handles
Note: Jockey wheel and chocks not included.
Caravan wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone. This is the part that contains the rollers of the caravan wheel bearing. Caravan and Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer) is called the inner bearing.
The bearing on the outside is called the outer bearing.
Parallel bearings are generally considered better for going off road as they have a higher load rating (1600 kg). With standard bearings, the inner bearing is larger than the outer, but with parallel bearings they're the same size.
This bearing kit is rated to 1600kg/pair.
1600kg Jap Parallel Caravan Bearing Kit Includes:
2 x Bearing cup L68110, Jap
2 x Bearing cone L68149, Jap
1 x Grease cap (DC2)
1 x Seal - 28600 - Slimline type
Marine trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the marine trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
Marine bearing kits are provided with a marine seal designed to prevent water ingress and grease contamination.
This bearing kit is rated to 2000kg/pair.
2000kg Japanese Marine Bearing Kit Includes:
1 x Bearing cup (HR30210J)
1 x Bearing cone (HR30210J)
1 x Bearing cup 15245
1 x Bearing cone 15123
1 x Grease cap DC2
1 x Seal Marine 2T/3T
Replacement jockey wheel for AL-KO jockey wheels. This replacement jockey wheel handle is fitted with a push out roll pin.
Replacement jockey wheel for AL-KO jockey wheels. This replacement jockey wheel handle is fitted with a 6/8" grub screw.
A Jockey wheel clamp is used to fit a jockey wheel to your drawbar. This jockey wheel clamp is configured to allow for the jockey wheel to be removed when not in use or the towed trailer is in transit. The clamp is fitted with a steel threaded 90 degree handle. A soft touch coating has been applied to the handle in a high visibility red. The clamp can be either welded or bolted to your drawbar.
AL-KO jockey wheels include a serviceable part called a thrust bearing. Sticking or grinding when raising or lowering the jockey wheel is a typical sign that your thrust bearing and washers are due for replacement and the shaft is due for a clean. The AL-KO thrust bearing kit includes a thrust bearing, top washer and bottom washer.
This U bolt kits contain the U bolts, nuts and washers for fixing one jockey wheel to your drawbar.
This jockey wheel U bolt set suits drawbars with dimensions of 75mm x 50mm.
Includes:
2 x U-Bolts
4 x Nyloc Nuts
4 x Washers
Includes:
1 x HR30210J Cup
1 x 15245 Cup
1 x HR30210J Cone
1 x 15123 Cone
1 x Grease Cap
1 x Seal
The Navigator Jockey Wheel & Chock Buddy comes in two sizes - small or large! No more jockey wheels rolling around in your tunnel boot or cab - keep all your gear safe and protected with the best caravan gear on the market!
LARGE - Made to fit a jockey wheel to the maximum length of 85cm and width 30cm
FEATURES
- Allows storage for your wheel chocks and jack stand winder
- Made to fit a "Trail a Mate" hydraulic jack
- Features soft padded lining to help protect the interior of your tunnel boot and items within it
- Large strong zipper allows easy access
- Durable outer fabric
- Webbing carry handles
Note: Jockey wheel and chocks not included.
Caravan wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone. This is the part that contains the rollers of the caravan wheel bearing. Caravan and Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer) is called the inner bearing.
The bearing on the outside is called the outer bearing.
Parallel bearings are generally considered better for going off road as they have a higher load rating (1600 kg). With standard bearings, the inner bearing is larger than the outer, but with parallel bearings they're the same size.
This bearing kit is rated to 1600kg/pair.
1600kg Jap Parallel Caravan Bearing Kit Includes:
2 x Bearing cup L68110, Jap
2 x Bearing cone L68149, Jap
1 x Grease cap (DC2)
1 x Seal - 28600 - Slimline type
Marine trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the marine trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
Marine bearing kits are provided with a marine seal designed to prevent water ingress and grease contamination.
This bearing kit is rated to 2000kg/pair.
2000kg Japanese Marine Bearing Kit Includes:
1 x Bearing cup (HR30210J)
1 x Bearing cone (HR30210J)
1 x Bearing cup 15245
1 x Bearing cone 15123
1 x Grease cap DC2
1 x Seal Marine 2T/3T
Replacement jockey wheel for AL-KO jockey wheels. This replacement jockey wheel handle is fitted with a push out roll pin.
Replacement jockey wheel for AL-KO jockey wheels. This replacement jockey wheel handle is fitted with a 6/8" grub screw.
A Jockey wheel clamp is used to fit a jockey wheel to your drawbar. This jockey wheel clamp is configured to allow for the jockey wheel to be removed when not in use or the towed trailer is in transit. The clamp is fitted with a steel threaded 90 degree handle. A soft touch coating has been applied to the handle in a high visibility red. The clamp can be either welded or bolted to your drawbar.
AL-KO jockey wheels include a serviceable part called a thrust bearing. Sticking or grinding when raising or lowering the jockey wheel is a typical sign that your thrust bearing and washers are due for replacement and the shaft is due for a clean. The AL-KO thrust bearing kit includes a thrust bearing, top washer and bottom washer.
This U bolt kits contain the U bolts, nuts and washers for fixing one jockey wheel to your drawbar.
This jockey wheel U bolt set suits drawbars with dimensions of 75mm x 50mm.
Includes:
2 x U-Bolts
4 x Nyloc Nuts
4 x Washers
© 2022 Shop RV Parts Australia. All Rights Reserved
