Showing 1–16 of 22 results

Navigator Jockey Wheel & Chock Buddy - S

$49.99

The Navigator Jockey Wheel & Chock Buddy comes in two sizes - small or large! No more jockey wheels rolling around in your tunnel boot or cab - keep all your gear safe and protected with the best caravan gear on the market!

Navigator Jockey Wheel & Chock Buddy - L

$59.99

The Navigator Jockey Wheel & Chock Buddy comes in two sizes - small or large! No more jockey wheels rolling around in your tunnel boot or cab - keep all your gear safe and protected with the best caravan gear on the market!

Trailmate Jockey Wheel/Jack

$548.90

The Trail-A-Mate has a lifting capacity of 1000kg making it suitable for jacking Caravans or Trailers up to 2900kg ATM. It suits standard 50mm clamps making it a straight swap for your existing jockey wheel and has 4 positions for the clamp on the 500mm outer shaft - plus the lift height of 380mm.

FEATURES:

- Includes: Base plate, Lifting clamp, Jacking bracket, Jacking handle, Wheel only, Extendable wheel brace, Built in safety lock
- 4 Positions for the clamp on the 50mm outer haft - plus the lift height of 380mm
- Suits standard 50mm clamps

AL-KO - Hex Drive Corner Steady Handle - 654700

$21.18

The Hex drive handle for is used to raise and lower Hex Drive corner steadies. The handle is 800mm long and zinc plated for corrosion resistance.

AL-KO - 1600kg Parallel Caravan Bearing - Japanese - 484501

$65.25

Caravan wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone. This is the part that contains the rollers of the caravan wheel bearing. Caravan and Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.

In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer) is called the inner bearing.

The bearing on the outside is called the outer bearing.

Parallel bearings are generally considered better for going off road as they have a higher load rating (1600 kg). With standard bearings, the inner bearing is larger than the outer, but with parallel bearings they're the same size.

This bearing kit is rated to 1600kg/pair.

1600kg Jap Parallel Caravan Bearing Kit Includes:

2 x Bearing cup L68110, Jap
2 x Bearing cone L68149, Jap
1 x Grease cap (DC2)
1 x Seal - 28600 - Slimline type

AL-KO - 2000kg Marine Bearing Set - Japanese - 487002M

$164.88

Marine trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the marine trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
Marine bearing kits are provided with a marine seal designed to prevent water ingress and grease contamination.

This bearing kit is rated to 2000kg/pair.

2000kg Japanese Marine Bearing Kit Includes:

1 x Bearing cup (HR30210J)
1 x Bearing cone (HR30210J)
1 x Bearing cup 15245
1 x Bearing cone 15123
1 x Grease cap DC2
1 x Seal Marine 2T/3T

AL-KO - AL-KO Big Foot Box Set - 655900

$81.55

The AL-KO Big Foot box set is suitable for fitment as an aftermarket product to most caravans/trailers. This unique product provides the corner steady with a flat load bearing surface, ideal for soft ground. No more carrying around pieces of wood to put under the corner steady on soft ground!

As with AL-KO corner steadies, the AL-KO Big Foot Boxed Set are manufactured from quality materials designed to ensure that the end user is able to stabilize the caravan or trailer with the minimum of effort.
The Big Foot Boxed Set includes feet and hardware for the installation of a Big Foot to 4 landing legs.

AL-KO - Drop Down Corner Steady With Big Foot - 590mm - Zinc - 654859

$123.38

The "drop down" corner steady requires only a small amount of lowering to steady the caravan and can be swung from the horizontal travelling position to a number different angles including the optimum position of vertical.
The AL-KO Big Foot fitted to this drop down corner steady will be found fitted to most caravans/trailers on the Australian Market. This unique product provides the corner steady with a flat load bearing surface, ideal for soft ground. No more carrying around pieces of wood to put under the corner steady on soft ground!
This corner steady has a maximum length of 590mm and is Zinc plated for corrosion resistance.

AL-KO - Hex Drive Corner Steady - Side Bolt On - 500mm - Zinc - 654500

$67.85

AL-KO was the first company to introduce the hexagon drive on the screw shaft of the corner steady, providing positive drive. Some innovative customers use a hexagon socket and a cordless drill to quickly and effortlessly raise and lower the steady. Not all corner steadies are created equally.
All AL-KO corner steadies have been tested and meet the requirements of Caravan Industry Association Australia (CIAA), the Australian controlling body for caravan manufacturing standards.
This corner steady is designed to be bolted to the underside of your chassis. This corner steady has a maximum length of 500mm and is zinc plated for corrosion resistance.

AL-KO - Jockey Wheel Handle - Roll Pin Fit - 629626

$15.92

Replacement jockey wheel for AL-KO jockey wheels. This replacement jockey wheel handle is fitted with a push out roll pin.

AL-KO - Hex Drive Corner Steady - Top Mount Bolt On - 700mm - Gal - 654701G

$91.12

AL-KO was the first company to introduce the hexagon drive on the screw shaft of the corner steady, providing positive drive. Some innovative customers use a hexagon socket and a cordless drill to quickly and effortlessly raise and lower the steady. Not all corner steadies are created equally. All AL-KO corner steadies have been tested and meet the requirements of Caravan Industry Association Australia (CIAA), the Australian controlling body for caravan manufacturing standards. This corner steady is designed to be bolted to the underside of your chassis. This corner steady has a maximum length of 700mm and is galvanised for corrosion resistance.

A level van makes all the difference when camping and these AL-KO Corner Steadies have been doing so for years with their sturdy & user-friendly design that have won over allot of local caravan manufacturers since. These are the extra height bolt-on steadies which are a great replacement if you do not wish to weld to the chassis or are just replacing what’s already there as you get a big 700 mm of completely adjustable height with the low clearance of a 95 mm when closed and it’s the standard 17-mm hex drive nut for smooth easy winding. Lastly being AL-KO proven quality it’s an all steel construction with zinc plating to keep it in service for years to come.

 

AL-KO - Jockey Wheel Handle - 6/8" Grub Screw Fit - 629610

$16.14

Replacement jockey wheel for AL-KO jockey wheels. This replacement jockey wheel handle is fitted with a 6/8" grub screw.

JOIN OUR COMMUNITY

Get E-mail updates about our latest shop and special offers.