Showing 1–16 of 19 results

AL-KO - Premium Quick Release Trailer And Marine Winch Handle - 635906

$23.23

This 190mm winch handle suits AL-KO premium marine and trailer winches. The clever handle design allows quick release and re-attachment to the desired gear shaft.

AL-KO - Trailer Winch - 700kg line pull capacity, 5:1 gear ratio, Snap hook, 5mm x 6m cable - 636005

$151.90

A unique feature of the Premium range is the galvanised rectangular frame that provides the high resistance to torsional distortion.

The clever handle design allows quick release and re-attachment to the desired gear shaft without the operator having to jump from one side of the trailer to the other.

The bolt hole patterns suit most existing boat trailers.

AL-KO - AL-KO 5:1 Marine Winch With 6M Webbing Strap - 635005W

$230.66

A unique feature of the Premium range is the galvanised rectangular frame that provides the high resistance to torsional distortion.

The clever handle design allows quick release and re-attachment to the desired gear shaft without the operator having to jump from one side of the trailer to the other.

The bolt hole patterns suit most existing boat trailers.

Bushranger Revo Winch 10,000lb | wire

$945.00

Gearbox mounted braking system | 100 load holding, proportional friction braking system located inside the gearbox, away from the drum - eliminating heat transfer to rope.

Zero brake drag | Zero drag braking system allows for the winch to be powered out under no load without heat build-up, making unspooling a breeze.

Premium Motor design | Series wound, 12V, 5.2HP motor made with high grade materials resulting in low current draw and longer life at extreme load.

4 stage oversized gearbox | designed for maximum strength and durability. Extra wide gears improve load distribution resulting in less wear and increased long term reliability. Externally adjustable, 16 position gearbox clocking for ease of fitment and use.

Clockable motor housing | 3 position motor clocking for versatility during fitting

Control box | Multiple mounting orientations to suit every installation. Supplied with additional mounting bracket for hassle free installation.

Wired Hand Controller | Full sealed, IP67 rated, ergonomic hand controller with 5m of cable for plenty of reach

In-Line/Off-set roller fairlead | Unique stainless steel, steel rollers will not rust or peel. Tough, powder coated steel frame for maximum durability.

Wire rope | Tough 9.2mm steel cable paired with a 3/8" removable clevis hook

500A Contactor | Heavy duty sealed contractor reliably distributes power with minimal voltage drops.

Waterproof | Fully sealed motor, gearbox and drum for maximum protection from water, dust and debris.

No-lift clutch | easy to use spring loaded cam style clutch mechanism

Tough Design | strong and lightweight aluminum alloy housings with durable black powder coat finish

Bushranger Revo Winch 12,000lb | synthetic

$1,194.60

Gearbox mounted braking system | 100 load holding, proportional friction braking system located inside the gearbox, away from the drum - eliminating heat transfer to synthetic rope.

Zero brake drag | Zero drag braking system allows for the winch to be powered out under no load without the heat build-up, making unspooling a breeze.

Premium Motor design | Series wound, 12V, 6.2HP motor made with high-grade materials resulting in low current draw and longer life at extreme load.

4 stage oversized gearbox | Designed for maximum strength and durability.

Extra-wide gears improve load distribution resulting in less wear and increased long term reliability. Externally adjustable, 16 position gearbox clocking for ease of fitment and use.

Clockable motor housing | 3 position motor clocking for versatility during fitting

Control box | Multiple mounting orientations to suit every installation. Supplied with additional mounting bracket for hassle-free installation.

Wireless Hand Controller | Full sealed, IP67 rated, ergonomic hand controller with long-range. Sealed 433MHz wireless receiver mounted internally to control box.

In-Line/Off-set Hawse Fairlead | Innovative two-position, aircraft-grade aluminium design to suit in-line and off-set mounting requirements.

Synthetic Rope | Premium, 11mm synthetic rope paired with a ½ removable clevis hook

500A Contactor | Heavy-duty sealed contractor reliably distributes power with minimal voltage drops.

Waterproof | Fully sealed motor, gearbox and drum for maximum protection from water, dust and debris.

No-lift clutch | Easy to use spring-loaded cam style clutch mechanism

Multi-mount control box | For easier installation

Tough Design | Strong and lightweight aluminium alloy housings with durable black powder coat finish

Bushranger Revo Winch 12,000lb | wire

$1,095.01

Gearbox mounted braking system | 100 load holding, proportional friction braking system located inside the gearbox, away from the drum - eliminating heat transfer to rope.

Zero brake drag | Zero drag braking system allows for the winch to be powered out under no load without heat build-up, making unspooling a breeze.

Premium Motor design | Series wound, 12V, 6.2HP motor made with high grade materials resulting in low current draw and longer life at extreme load.

4 stage oversized gearbox | designed for maximum strength and durability. Extra wide gears improve load distribution resulting in less wear and increased long term reliability. Externally adjustable, 16 position gearbox clocking for ease of fitment and use.BClockable motor housing | 3 position motor clocking for versatility during fitting

Control box | Multiple mounting orientations to suit every installation. Supplied with additional mounting bracket for hassle free installation.

Wired Hand Controller | Full sealed, IP67 rated, ergonomic hand controller with 5m of cable for plenty of reach

In-Line/Off-set roller fairlead | Unique stainless steel, steel rollers will not rust or peel. Tough, powder coated steel frame for maximum durability.

Wire rope | Tough 10.2mm steel cable paired with a 1/2 removable clevis hook

500A Contactor | Heavy duty sealed contractor reliably distributes power with minimal voltage drops.

Waterproof | Fully sealed motor, gearbox and drum for maximum protection from water, dust and debris.

No-lift clutch | easy to use spring loaded cam style clutch mechanism

Tough Design | strong and lightweight aluminum alloy housings with durable black powder coat finish

Bushranger Revo Winch 10,000lb | synthetic

$1,045.00

Gearbox mounted braking system | 100 load holding, proportional friction braking system located inside the gearbox, away from the drum - eliminating heat transfer to synthetic rope.

Zero brake drag | Zero drag braking system allows for the winch to be powered out under no load without heat build-up, making unspooling a breeze.

Premium Motor design | Series wound, 12V, 5.2HP motor made with high grade materials resulting in low current draw and longer life at extreme load.

4 stage oversized gearbox | designed for maximum strength and durability. Extra wide gears improve load distribution resulting in less wear and increased long term reliability. Externally adjustable, 16 position gearbox clocking for ease of fitment and use.

Clockable motor housing | 3 position motor clocking for versatility during fitting

Control box | Multiple mounting orientations to suit every installation. Supplied with additional mounting bracket for hassle free installation.

Wireless Hand Controller | Full sealed, IP67 rated, ergonomic hand controller with long range. Sealed 433MHz wireless receiver mounted internally to control box.

In-Line/Off-set Hawse Fairlead | Innovative two position, aircraft grade aluminium design to suit in-line and off-set mounting requirements.

Synthetic Rope | Premium, 10mm synthetic rope paired with a ½ removable clevis hook

500A Contactor | Heavy duty sealed contractor reliably distributes power with minimal voltage drops.

Waterproof | Fully sealed motor, gearbox and drum for maximum protection from water, dust and debris.

No-lift clutch | easy to use spring loaded cam style clutch mechanism

Tough Design | strong and lightweight aluminum alloy housings with durable black powder coat finish

Bushranger Snatch Kit, Standard

$119.00

Snatch Strap
Bushranger® Snatch Straps are engineered and manufactured to the highest quality standards. All Bushranger straps are Australian tested both in a NATA accredited lab and 4WD field test conditions. Snatch straps are purpose-designed to stretch under intense loads from a moving recovery vehicle. Kinetic energy combined with the elastic properties of the recovery strap work together to pull a disabled vehicle and assist in recovery.

Reinforced Protection | Added protective eyelets to ensure maximum strength when used with shackles and hooks.
Strap Usage Recording Tags | Located with the compliance tags, the usage tags allow you to record and track the number of times the strap is used to help identify fatigue and age of the strap.
Wrap-it Strap | Easy storage wrap it strap, stitched to the snatch strap so it is ready to roll up and use any time.
Compliance | Designed and tested to comply with the latest Australian Consumer Goods [Motor Vehicle Recovery Strap] Safety Standard 2017.
Quality | Manufactured from high-quality nylon material & reinforced stitching.

Bow Shackles
Capacity 3.25 tonne
Tested in accordance to AS2741-2002 SHACKLES; clause 9.2, Appendix D & appendix F

Gloves
Designed to protect hands, during vehicle recovery
Kevlar reinforced palm patch providing increased protection when working with wire or synthetic rope winch cables
Flexibility for greater comfort
Reinforced wear points

Recovery Bag
Made from heavy-duty polyester material with mesh pockets and webbing straps
Water and dust resistant
Traditional design, to fit in most draw systems and minimise wasted space
Extra storage pockets

New

Bushranger Snatch Kit, Heavy Duty

$140.00

Snatch Strap
Bushranger® Snatch Straps are engineered and manufactured to the highest quality standards. All Bushranger straps are Australian tested both in a NATA accredited lab and 4WD field test conditions. Snatch straps are purpose-designed to stretch under intense loads from a moving recovery vehicle. Kinetic energy combined with the elastic properties of the recovery strap work together to pull a disabled vehicle and assist in recovery.
Reinforced Protection | Added protective eyelets to ensure maximum strength when used with shackles and hooks.
Strap Usage Recording Tags | Located with the compliance tags, the usage tags allow you to record and track the number of times the strap is used to help identify fatigue and age of the strap.
Wrap-it Strap | Easy storage wrap it strap, stitched to the snatch strap, so it is ready to roll up and use any time.
Compliance | Designed and tested to comply with the latest Australian Consumer Goods [Motor Vehicle Recovery Strap] Safety Standard 2017.
Quality | Manufactured from high-quality nylon material & reinforced stitching.

Bow Shackles
Capacity 4.75 tonne
Tested in accordance to AS2741-2002 SHACKLES; clause 9.2, Appendix D & appendix F

Gloves
Designed to protect hands, during vehicle recovery
Kevlar reinforced palm patch providing increased protection when working with wire or synthetic rope winch cables
Flexibility for greater comfort
Reinforced wear points

Recovery Bag
Made from heavy-duty polyester material with mesh pockets and webbing straps
Water and dust resistant
Traditional design, to fit in most draw systems and minimise wasted space
Extra storage pockets

Bushranger Winch Recovery kit

$299.00

Snatch Strap
Snatch straps are purpose-designed to stretch under intense loads from a moving recovery vehicle. Kinetic energy combined with the elastic properties of the recovery strap work together to pull a disabled vehicle and assist in recovery.
Minimum breaking strain: 8,000kg
Length: 9m
Weight: 2.3kg
Warranty: 5 Year

Tree Trunk Protector
In a vehicle recovery situation, the use of wrapping cable, rope or chain around a tree, causes damage to both your recovery equipment and the tree. The Tree Trunk Protector will provide a secure recovery attachment point while protecting the tree
Minimum breaking strain: 11,000kg
Length: 3m
Weight: 1.41kg
Warranty: 5 Year

Winch Extension Strap
Winch extension straps are designed to extend the reach capability of your winch cable.
Minimum breaking strain: 5,500kg
Length: 10m
Weight: 1.75kg
Warranty: 5 Year

Snatch Block
Working load: 11,000kg
Minimum breaking strength: 18,000kg
Dimensions: 197mm x 105mm x 50mm
Material: UV Stable Matt Black Powder coated 6mm steel side plates
Bearing: Precision machined steel with grease nipple axle
Rope type: Suitable for synthetic or wire rope up to 12mm diameter
Weight: 2.5kg
Warranty: 5 Years

Bow Shackles
Capacity 3.25 tonne & 4.75 tonne
Tested in accordance to AS2741-2002 SHACKLES; clause 9.2, Appendix D & appendix F

Recovery Damper
In the event of a failure, the recovery damper will absorb most of the energy in the cable or strap, thereby significantly reducing the recoil and force the line to drop straight down to the ground. Manufactured from heavy-duty reinforced PVC, with reflective tape for night time recoveries, internal weight pockets and extra pocket if extra weight is required, wide Velcro tabs for quick set-up and pack away so you can get back to exploring.

Gloves
Designed to protect hands, during vehicle recovery
Kevlar reinforced palm patch providing increased protection when working with wire or synthetic rope winch cables
Flexibility for greater comfort
Reinforced wear points

Recovery Bag
Made from heavy-duty polyester material with mesh pockets and webbing straps
Water and dust resistant
Traditional design, to fit in most draw systems and minimise wasted space
Extra storage pockets

Bushranger Snatch Strap 11,000kg, 9m

$99.00

Reinforced Protection | Added protective eyelets to ensure maximum strength when used with shackles and hooks.

Strap Usage Recording Tags | Located with the compliance tags, the usage tags allow you to record and track the number of times the strap is used to help identify fatigue and age of the strap.

Wrap-it Strap | Easy storage wrap it strap, stitched to the snatch strap so it is ready to roll up and use any time.

Compliance | Designed and tested to comply with the latest Australian Consumer Goods [Motor Vehicle Recovery Strap] Safety Standard 2017.

Quality | Manufactured from high-quality nylon material & reinforced stitching.

JOIN OUR COMMUNITY

Get E-mail updates about our latest shop and special offers.