Showing 1–16 of 18 results

-12%

Briteangle LED warning triangle

$79.00 $89.95

All road users will feel much safer and more confident on the road with the BriteAngle LED Warning Triangle packed and ready for the trip. If you need to pull over on the side of a road due to an emergency or breakdown, the warning triangle can be placed behind or mounted onto the back of the stationary vehicle, so any approaching traffic is alerted of the potential hazard. The LED high-intensity lights can be seen from up to 300 m away during the day or night, depending on weather conditions. It's easy to assemble using the protective case that doubles as a stand and it can withstand winds of up to 72 km/h. With its built-in switch mechanism, you will have peace of mind that the battery will not accidentally run out when in storage. Be as safe as possible on the road for your next trip by packing the high quality and reliable BriteAngle LED Warning Triangle.

Bushranger Night Hawk 39.5" VLI Series SR LED Light Bar

$470.00

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED'S for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern.

Bushranger Night Hawk 43.5" VLI Series SR LED Light Bar

$520.00

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED'S for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern.

Bushranger Night Hawk 51" VLI Series SR LED Light Bar

$595.00

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED'S for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern.

Bushranger X-Bar, universal driving light bar, chrome

$75.90

Bushranger® X-Bar, Number Plate Light Mounting Bar suitable for 4×4, SUV, passenger vehicles as a universal light installation solution. Fixes to the vehicle by using the existing licence plate mounting holes to fit, for a sturdy mounting platform. Quality manufactured and frontal airbag compliant (ADR69). Available in black or chrome.


NOTE: Bar only, lights not included.

Bushranger X-Bar, universal driving light bar, black

$64.90

Bushranger® X-Bar, Number Plate Light Mounting Bar suitable for 4×4, SUV, passenger vehicles as a universal light installation solution. Fixes to the vehicle by using the existing licence plate mounting holes to fit, for a sturdy mounting platform. Quality manufactured and frontal airbag compliant (ADR69). Available in black or chrome.


NOTE: Bar only, lights not included.

Bushranger 260W wiring loom with deutsch plug

$59.99

Bushranger® Wiring Loom kit is a quick and easy pre-assembled loom.

Bushranger Night Hawk VLI Series Wiring System

$89.00

The Bushranger Night Hawk VLI Series Wiring System has been pushed to the edge by developing the first dedicated auxiliary light wiring system to incorporate relay free switching and brightness control functionality. What does this mean? Simpler wiring, easier installation, more user control and greater reliability over the traditional plug and play wiring loom. The commonly used automotive 12V relay is removed entirely and replaced with modern transistor switching, which is built into the light and the control module. Each light is powered directly from the battery, rather than through a relay, meaning there are no power restrictions for the wiring system, which is a common limitation with traditional relay-based wiring looms. Up to 4 x Bushranger Night Hawk VLI Series LED lights can be controlled by 1 wiring system and any combination of models/sizes can be used.

The brightness control function allows the user to adjust the brightness of all lights on the system with 7 different light intensity settings giving complete control to match the driving conditions. In certain conditions, vision can be greatly enhanced by reducing the intensity of light projected, for example, dense bush tracks, hilly terrain or even some highway driving where an excess of light can lead to intense reflections and eye strain. now you can dial these high intensity lights back to a more comfortable level. Use a second wiring system as a work/camping / reverse light setup and control the intensity of the lit area. You have complete control like never before.

Plug & Play Connectors

The wiring system uses control leads with waterproof plugs which quickly and easily join together to allow plenty of flexibility when routing from the control module to the VLI lights.

Soft Start Programming

The soft start feature programmed into the control module gradually increases the light intensity over the first second of operation to reduce eye strain and flash blindness that commonly occurs when switching into high beam mode with high intensity LED lights fitted. It also extends the life of the electronics by reducing the sudden shock load that occurs when high output LED's change instantly from off to on.

PWM Brightness Control

The control module uses a Pulse Width Modulation (PWM) signal to control the brightness of all VLI series lights connected to the system. It allows the option of 7 x brightness settings which can be quickly changed at the turn of a dial to suit the conditions.

 

Modern, electronically switched wiring system offers a simpler, more reliable and smarter alternative to regular relay-based wiring harnesses.Modern, electronically switched wiring system offers a simpler, more reliable and smarter alternative to regular relay-based wiring harnesses.
'Plug & Play' modular design provides versatility to suit any vehicle and reduces installation time compared to traditional wiring harness installs.
Works with all Bushranger Night Hawk VLI Series Lights with no limitation on power rating of each light.
Wiring system, as supplied, controls up to 2 x lights. Capacity to control up to 4 x VLI Series lights simultaneously with the use of additional control leads (sold separately).
PWM brightness control offers 7 x brightness settings at the turn of a dial.
Soft Start Programming reduces eye fatigue by ramping up the brightness within the first second of operation.
Automatic Polarity Detection simplifies connection into the high beam circuit and works on positive and negatively switched vehicles.
Plug & Play headlight adaptors, fuse taps and additional control leads available separately.

Bushranger Night Hawk 5.5" VLI Series SR LED Light Bar

$115.01

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED's for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern. Note: NHT055VLI comes with flood and diffused cover, remove covers for a spot beam.

ACCESSORIES AVAILABLE Protective covers: spot, flood, diffused, black, blue, clear and orange and clamp brackets (pair). (sold separately)

Bushranger Night Hawk 13" VLI Series SR LED Light Bar

$215.00

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED's for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern.

Bushranger Night Hawk 17" VLI Series SR LED Light Bar

$230.00

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED's for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern.

Bushranger Night Hawk 20.5" VLI Series SR LED Light Bar

$275.00

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED'S for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern.

Bushranger Night Hawk 24.5" VLI Series SR LED Light Bar

$315.00

DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

HIGH OUTPUT OSRAM LED'S genuine, high output OSRAM LED'S for unmatched performance.

MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows complete customisation of the beam pattern.

JOIN OUR COMMUNITY

Get E-mail updates about our latest shop and special offers.