We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
7 1/2" Hub - Landcruiser Stud Pattern - Chinese LM Bearings - Standard Seal
7 1/2” Hub Kit, Landcruiser Stud Pattern 6x 139.7mm PCD)
Fitted with 1/2” UNF wheel studs and nuts.
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension)
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc)
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser)
Includes:
1 x 7 1/2” hub fitted with 6 x 1/2” UNF wheel studs
6 x 1/2” UNF wheel nuts
1 x Bearing Cone LM60748 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Standard Seal - LM Type
1 x Grease cap
Please login to leave your review
This 3/4" hydraulic brake master cylinder is designed for fitment to AL-KO override couplings already fitted with an AL-KO Hydraulic Conversion Body (AL-KO Part Number 610949).
When used in conjunction with a conversion body (AL-KO Part Number 610949) and suitable hydraulic piping, an override coupling can be used to activate your trailer's hydraulic brakes.
Replacement red plastic cap for fitment to 3/4" Hydraulic Brake Master Cylinder (AL-KO Part Number: 313002). Should your hydraulic brake master cylinder cap can be damaged or misplaced, your hydraulic brakes may be rendered inoperable. For this reason, it is a good idea to purchase and carry a spare when completing remote trips.
Includes:
1 x Galvanised 6” Hub fitted with 5x Zinc plated 7/16” UNF wheel studs.
5 x Zinc plated 7/16” UNF wheel nuts
1 x Bearing Cone LM67048 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Marine Seal - LM Type
1 x Grease cap
Includes:
1 x 6” Hub fitted with 5 x 1/2” wheel studs.
5 x 1/2” UNF wheel nuts
1 x Bearing Cone LM67048 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Marine Seal - LM Type
1 x Grease cap
Includes:
1 x Galvanised 6” Hub fitted with 5x Zinc plated 7/16” UNF wheel studs
5 x Zinc plated 7/16” UNF wheel nuts
1 x Bearing Cone LM67048 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Marine Seal - LM Type
1 x Grease cap
Includes:
1 x Galvanised 6” Hub fitted with 5x Zinc plated 7/16” UNF wheel studs.
5 x Zinc plated 7/16” UNF wheel nuts
1 x Bearing Cone LM67048 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Marine Seal - LM Type
1 x Grease cap
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).
Includes:
1 x 6” Hub fitted with 5 x 1/2” wheel studs.
5 x 1/2” UNF wheel nuts
1 x Bearing Cone LM68149 - Chinese
1 x Bearing Cone LM12749 - Chinese
1 x Seal - SL Type
1 x Grease cap
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension)
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc)
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser)
Includes:
1 x 6” Hub fitted with 5 x 7/16” UNF wheel studs
4 x 7/16” UNF wheel nuts
1 x Bearing Cone LM67048 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Seal - LM Type
1 x Grease cap
Includes:
1 x SL bearing inner (68149/68110)
1 x SL bearing outer (12749/12710)
1 x SL seal (59.1mm O.D. x 42.7mm I.D.)
1 x 45mm dust cap
6 x 1/2″ wheel nuts
A washer, castellated axle nut and split pin is used to secure your bearings and in turn your hubs to your axle.
Kit includes:
2 x castellated Axle Nuts (3/4"UNF)
2 x Washers (3/4" ID 1 1/2" OD)
2 x Split Pins (4mm x 25mm)
A bearing protector not only automatically lubricates your bearing but also protects your bearing from water and dust ingress ultimately ensuring your bearing has a longer life.
Suits hubs with a 45mm diameter bearing housing.
This bearing protector kit includes:
2 x Bearing Protectors
2 X Dust covers
The "drop down" corner steady requires only a small amount of lowering to steady the caravan and can be swung from the horizontal travelling position to a number different angles including the optimum position of vertical.
The AL-KO Big Foot fitted to this drop down corner steady will be found fitted to most caravans/trailers on the Australian Market. This unique product provides the corner steady with a flat load bearing surface, ideal for soft ground. No more carrying around pieces of wood to put under the corner steady on soft ground!
This corner steady has a maximum length of 740mm and is Zinc plated for corosion resistance.
Includes:
1 x Galvanised Disc Hub fitted with 5 x 1/2” wheel studs.
5 x 1/2” UNF wheel nuts
1 x Bearing Cone LM67048 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Marine Seal - LM Type
1 x Grease cap
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).
Includes:
1 x Galvanised Disc Hub fitted with 5 x 1/2” wheel studs.
5 x 1/2” UNF wheel nuts
1 x Chinese Bearing Cone LM68149
1 x Chinese Bearing Cone LM12749
1 x Marine Seal - SL Type
1 x Grease cap
AL-KO grease caps press in to the outside of your hub. The grease cap holds the grease that surrounds your bearings in place and when In good condition, effectively prevents grease contamination through water and dust ingress.
AL-KO was the first company to introduce the hexagon drive on the screw shaft of the corner steady, providing positive drive. Some innovative customers use a hexagon socket and a cordless drill to quickly and effortlessly raise and lower the steady. Not all corener steadies are created equally.
All AL-KO corner steadies have been tested and meet the requirements of Caravan Industry Association Australia (CIAA), the Australian controlling body for caravan manufacturing standards.
This corner steady is designed to be bolted to the side of your chassis. This corner steady has a maximum length of 500mm and is galvanised for corosion resistance.
AL-KO was the first company to introduce the hexagon drive on the screw shaft of the corner steady, providing positive drive. Some innovative customers use a hexagon socket and a cordless drill to quickly and effortlessly raise and lower the steady. Not all corener steadies are created equally.
All AL-KO corner steadies have been tested and meet the requirements of Caravan Industry Association Australia (CIAA), the Australian controlling body for caravan manufacturing standards.
This corner steady is designed to be bolted to the underside of your chassis. This corner steady has a maximum length of 700mm and is zinc plated for corosion resistance.
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).
Includes:
1 x Galvanised Disc Hub fitted with 5x 7/16” UNF wheel studs.
5x 7/16” UNF wheel nuts
1 x Bearing Cone LM67048 - Chinese
1 x Bearing Cone LM11949 - Chinese
1 x Marine Seal - LM Type
1 x Grease cap
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).
Includes:
1 x Galvanised Disc Hub fitted with 5x 7/16” UNF wheel studs.
5x 7/16” UNF wheel nuts
1 x Bearing Cone LM68149 - Chinese
1 x Bearing Cone LM12749 - Chinese
1 x Marine Seal - SL Type
1 x Grease cap
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).
Includes:
1 x Galvanised hub fitted with 5 x zinc plated 1/2” wheel studs.
5 x zinc plated 1/2” UNF wheel nuts
1 x Bearing Cone LM68149 - Chinese
1 x Bearing Cone LM12749 - Chinese
1 x 2 Piece Marine Seal - SL Type
1 x Grease cap
All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.
The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).
To ascertain what hub from the vast AL-KO range is required it is important to know the following:
Total load you expect a pair of hubs to carry in kg.
Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).
Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).
Includes:
1 x Galvanised hub fitted with 5 x zinc plated 7/16” wheel studs.
5 x zinc plated 7/16” UNF wheel nuts
1 x Bearing Cone LM68149 - Chinese
1 x Bearing Cone LM12749 - Chinese
1 x 2 Piece Marine Seal - SL Type
1 x Grease cap
AL-KO Dacromet coated hydraulic disc brake calipers are fitted with special pistons that will not rust.
The simplicity of hydraulic lines connecting multiple calipers makes this style of caliper suitable for installations where more than one axle is used.
Hydraulic disc brake calipers are typically actuated with over ride couplings or an electric over hydraulic actuation system such as AL-KO's IQ7. When Trailers with loaded weights exceeding 2000 kg require independent control and breakaway facility, causing the brakes to automatically be activated should the towing vehicle and the trailer become accidentally disconnected. AL-KO IQ7 fulfils this legal requirement.
AL-KO hydraulic disc brake calipers are suitable for disc hubs and rotors of thicknesses from 12mm to 15mm.
Recommended operating pressure is 6.9 mpa (1000psi). Mounting holes: 88.9mm centre to centre. (3.5")
Includes:
2 x Hydraulic Disc Brake Calipers Finished In Dacromet
2 x Brake Pads
Marine trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the marine trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
Marine bearing kits are provided with a marine seal designed to prevent water ingress and grease contamination.
LM (Holden bearings) are rated for 750 kg on a 39 mm round or 40 mm square axle.
LM Marine Bearing Kit Includes:
1 x LM67048 Cup
1 x LM11910 Cup
1 x L67048 Cone
1 x LM11949 Cone
1 x Grease Cap (H26)
1 x Marine Seal
1 x Split Pin 4mm x 25mm Zinc
Marine trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the marine trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together. In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
Marine bearing kits are provided with a marine seal designed to prevent water ingress and grease contamination.
LM (Holden bearings) are rated for 750 kg on a 39 mm round or 40 mm square axle.
LM Japanese Marine Bearing Kit Includes:
1 x Bearing cup LM67010, JAP
1 x Bearing cone LM67048, Jap
1 x Bearing cup LM11910, JAP
1 x Bearing cone LM11949, Jap
1 x Grease cap H26
1 x Seal Marine - LM and Composite
1 x Split pin 4MM x 25MM Zinc
Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone. This is the part that contains the rollers of the caravan wheel bearing. Caravan and Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer is called the inner bearing.
The bearing on the outside is called the outer bearing.
LM (Holden bearings) are rated for 750 kg on a 39 mm round or 40 mm square axle.
LM Trailer Bearing Kit Includes:
1 x Cinese bearing cup LM67010
1 x Chinese bearing cone LM67048
1 x Chinese bearing cup LM11910
1 x Chinese bearing cone LM11949
1 x Grease cup H26
1 x Seal 609 - LM Type
1 x Split pin 4MM x 25MM Zinc
Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
LM (Holden bearings) are rated for 750 kg on a 39 mm round or 40 mm square axle
LM Kit Includes:
1 x LM67010 Cup
1 x LM11910 Cup
1 x LM67048 Cone
1 x LM 11949 Cone
1 x Grease Cap
1 x Standard Seal
1 x Split Pin
Kit Includes:
2 x mechanical disk brake callipers
4 x Zinc Plated Blots 7/16 UNF x 2/14
4 x 7/16 washers - shake proof
4 x Flat zinc washers 7/16 x 7/8
Style:
Forward Pull
Marine trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the marine trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
Marine bearing kits are provided with a marine seal designed to prevent water ingress and grease contamination.
SL (Slimline or Ford) bearings are rated for 1500 kg on a 45 mm round or square axle.
Slimline Marine Bearing Kit Includes:
1 x L68110 Cup
1 x LM12710 Cup
1 x L68149 Cone
1 x LM 12749 Cone
1 x Grease Cap
1 x Marine Seal
1 x Split Pin
Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone. This is the part that contains the rollers of the caravan wheel bearing. Caravan and Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer is called the inner bearing.
The bearing on the outside is called the outer bearing.
SL (Slimline or Ford) bearings are rated for 1500 kg on a 45 mm round or square axle.
Slimline Trailer Bearing Kit Includes:
1 x Chinese bearing cup L68110
1 x Chinese bearing cone L68149
1 x Chinese bearing cup LM12710
1 x Chinese bearing cone LM12749
1 x Grease cap H26
1 x Seal - 28600 - Slimline type
1 x Split pin 4MM x 25MM Zinc
Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone. This is the part that contains the rollers of the caravan wheel bearing. Caravan and Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.
The bearing on the outside is called the outer bearing.
SL (Slimline or Ford) bearings are rated for 1500 kg on a 45 mm round or square axle.
Slim Line Trailer Bearing Kit Includes:
1 x L68110 Cup
1 x LM12710 Cup
1 x L68149 Cone
1 x LM 12749 Cone
1 x Grease Cap
1 x Standard Seal
1 x Split Pin
AL-KO stub axle 39mm round x 205mm machined with LM profile. This stub axle is rated 750kg/pair.
U Bolt fish are required to connect your axle to your springs. The U Bolt fish plate sits on the threaded side of the U bolt and is fastened to the U Bolt using a washer and nut.
This U Bolt fish plate is slotted to allow for U bolts with a width of 39mm to 56mm.
Hole centre to centre perpendicular to slot is 45mm.
This U bolt kits contain the U bolts, nuts and washers for fixing one axle.
When ordering for a multi axle application, order the number of kits to correspond with the number of axles.
Includes:
2 x U-Bolts
4 x Nyloc Nuts
4 x Washers
AL-KO Wheel Nuts are available in various sizes. Always ensure that you use wheel studs and nuts that are correct for the wheel size selected.
Includes 5 x wheel Studs, 1/2" zinc plated.
Zinc plated for additional corrosion resistance.
AL-KO Wheel Nuts are available in various sizes. Always ensure that you use wheel studs and nuts that are correct for the wheel size selected. Includes 5 X Wheel Nuts 7/16" black.
AL-KO Wheel Studs and nut kits are available in various sizes. Always ensure that you use wheel studs and nuts that are correct for the wheel size selected. Includes 5 x wheel Studs, 1/2" black and 5 x wheel nuts to suit.
AL-KO Wheel Studs and nut kits are available in various sizes. Always ensure that you use wheel studs and nuts that are correct for the wheel size selected. Includes 5 x wheel Studs, 1/2" zinc plated and 5 x zinc plated wheel nuts to suit. Wheel nuts and studs are zinc plated for additional corrosion resistance.
AL-KO wheel studs are all fitted with a knurled section that when inserted in to the hub, stops the stud from rotating. Always ensure that you use wheel studs that are correct for the wheel size selected. Includes 5 x Wheel Studs, 1/2" Zinc Plated. Zinc plated for additional corrosion resistance.
AL-KO wheel studs are all fitted with a knurled section that when inserted in to the hub, stops the stud from rotating. Always ensure that you use wheel studs that are correct for the wheel size selected.
Includes 5 x Wheel Studs, 7/16" Zinc Plated.
Zinc plated wheel studs for additional corrosion resistance.
AL-KO Wheel Studs and nut kits are available in various sizes. Always ensure that you use wheel studs and nuts that are correct for the wheel size selected. Includes 5 x wheel Studs, 7/16" black and 5 x wheel nuts to suit.
AL-KO Wheel Studs and nut kits are available in various sizes.
Always ensure that you use wheel studs and nuts that are correct for the wheel size selected.
Includes 5 x wheel Studs, 7/16" zinc plated and 5 x zinc plated wheel nuts to suit.
Wheel nuts and studs and zinc plated for additional corrosion resistance.
They feature ultra high strength shaft bushes, a stainless steel drive shaft, drive pawl and spring system for maximum corrosion resistance.
A unique feature of the Premium range is the galvanised rectangular frame that provides the high resistance to torsional distortion.
The clever handle design allows quick release and re-attachment to the desired gear shaft without the operator having to jump from one side of the trailer to the other.
The bolt hole patterns suit most existing boat trailers.
Secure your caravan, boat trailer, box trailer or horse float against theft using this simple wheel clamp.
The AL-KO wheel clamp is made out of heavy duty steel and is powder coated for weather resistance.
A weather cover is attached to the locks to minimise water ingress whilst in use.
The contact ends of the wheel clamp have an anti-scratch coating to protect your wheels. Includes two keys.
It can also be used to tighten or loosen bolts and nuts of 19mm, and is also made from high tensile steel.
FEATURES:
- Black writing on reflective yellow.
- Required on Caravan & Car combinations with a length of over 7.5m that use more than 1 lane to turn.
Falcon - Super Steady Mirrors are quite simply the best budget mirrors money can buy. We have looked at all the other budget mirrors being sold worldwide and have developed these world class mirrors as an superior alternative to other budget mirrors.
These Mirrors are in a completely different league of engineering quality and design to other budget Mirrors. These Mirrors are superior in every way and are the best budget mirrors in the world, but of course if you want the best mirrors in the world then buy Milenco Aero Mirrors.
They are totally compliant with the very latest (2021) vehicle safety regulations and are approved to the new 04 series of approvals.
These are Milenco quality and fit easily to all vehicles.
Features:
- 3-stage PWM Charge Management
- USB 2A USB Port
Includes:
1 x 200W Canvas Blanket Solar Panel
1 x Solar Cahrge Controller
2 x Leads
DOMETIC PLB40 40Ah LITHIUM BATTERY, 2 YEAR WARRANTY.
The Dometic PLB40 Ah Lithium Iron Phosphate battery delivers high levels of mobile power - up to 40 hours of Dometic CFX 40 W cooling on a single charge. Designed for powering portable fridge/freezers and other 12 V appliances while being off-grid. Thanks to its lightweight and compact design you can enjoy true independence and travel off-grid for longer.
The power of the Dometic PLB40 is supplied by integrated Lithium Iron Phosphate (LiFePO4) battery cells. Engineered for use in harsh outdoor environments, it's rugged design will keep your gear charged and ready even on the harshest expeditions.
Lightweight, with ergonomically designed stainless steel handle, the PLB40 is easy to carry, while an integrated DC-DC charger offers three convenient ways to charge via: the vehicle 12 V socket, solar panel or AC power. The user-friendly, integrated LCD display provides important information on performance including: the battery capacity, charging/discharging status and output status.
This market-leading battery system is the utilising cutting-edge technology which is a result of years of research and development. The Dometic PLB40 has powerful, integrated Lithium Iron Phosphate (LiFePO4) battery cells, providing an energy supply of 512 Wh. Ideal for powering portable fridges/freezers and other 12 V appliances while on adventures, the PLB40 provides up to 40 hours of cooling time for a Dometic CFX 40W on a single charge.
The integrated DC-DC charger offers three convenient ways to charge via: the vehicle 12 V socket, solar panel or AC power. The battery's integrated battery management system protects the PLB40 from under-voltage, over-voltage, short circuiting and overheating for optimum charge time, performance and storage. With this power management system, the Dometic PLB40 has a cycle of life which is up to five times longer than more commonly used lead-acid batteries.
DOMETIC CFX375DZ - PORTABLE FRIDGE/FREEZER 75L
The Power to be present:
With the Dometic CFX3, you have control of your outdoor experiences like never before. The CFX3 gives you the power to change your state of mind and put your well-being first.
On-road, off-road, outback or in the backyard, your ordinary and extraordinary adventures will be fuelled by fresher, safer food, less waste and more confidence, giving you the power to be present in any moment.
USER-FRIENDLY INTERFACE:
Weatherproof high-resolution user interface displays operating status;
Easy-to-read high-resolution colour display and soft touch buttons enabling seamless control and monitoring of
fridge/freezer performance.
RUGGED CONSTRUCTION:
Heavy-duty yet lightweight ExoFrame construction with fender frame and protected edges, protect the unit from damage.
EFFICIENT POWER CONSUMPTION:
Optimised VMSO3 compressor cooling technology efficiently refrigerates and deep-freezes to -7°C;
Active gasket technology provides a superior seal to retain cool air and minimise power consumption.
CONVENIENT CFX3 APP:
Allows temperature control and monitoring via Bluetooth or WiFi and provides performance history.
BATTERY: 3-Stage battery protection system prevents dead car battery or allows deep draw on dual batteries
FLEXIBLE POWER OPTIONS: Powered by AC, DC and solar
EASY TO CARRY: Strong aluminium alloy carry handles
STORAGE CAPACITY: Generous storage capacity of 75L to fit 113 cans
Dual storage compartments with independent temperature control for simultaneous cooling and freezing
WARRANTY: 3 Year Manufacturer + 2 Year Compressor Warranty
FEATURES:
- Capacity: 28 cans / 36L
- Thick PU insulation keeps ice frozen for days
- Large, leak-proof drain makes cleaning easy
- Rugged construction with one-piece rotomolded PE
- Deep-freeze lid seal ensures no gaps for air to enter or escape
- One-handed rubber latches for convenient opening and closing of the lid
- Now available in the fresh Ocean blue colour.
- Dimensions: 16.3" H x 27.2" W x 15.3" D
Dometic Slide Out Kitchen, 3 Burner / Sink / Benchtop, 1 Year Warranty
Designed and manufactured in Australia, the Slide Out Kitchen provides great functionality giving you seperate areas for cooking, cleaning, washing and serving.
Not only does the Dometic Slide Out Kitchen save valuable space in the kitchen area of your RV, its telescopic runners make it quick and easy to pull-out and stow away after use. It provides all the kitchen essentials: a sink, double-side access storage, three-burner cooktop, chopping board and serving bench.
The kitchen's modular aluminium construction makes it 40% lighter, while a large amount of built-in storage keeps dining and cooking equipment safe and secure. Easy to install on most RVs thanks to its simple three-step installation method, the Slide Out Kitchen takes cooking outdoors to new levels of convenience!
FEATURES:
- Dedicated area for cooking, cleaning, chopping and serving
- Lightweight aluminium construction- Easy 3-step installation process
- Compatible with all popular access doors
- Large dual side storage compartment
- Delivered ready-to-install
- Range of accessories available, including a chopping board, and utensil holder
EMBARK ON A SMART TECHNOLOGY ODYSSEY WITH COMPLETE 12V POWER MANAGEMENT SYSTEM FOR YOUR CARAVAN
12V power management system Odyssey consists of a battery and power management system BatteryPlus35, an OdysseyLink, connected to the BatteryPlus35 via a data cable, a wall mounted touch screen monitor and a free Odyssey app.
Monitor caravan's deep cycle battery and control its onboard features, including lights, water pump, hot water switch and slide-outs - all from a single touchscreen or via an app. Operate slide-outs from outside to ensure it is safe to do so. Check battery's estimated time to discharge or ensure solar panels provide enough power - always be in control of your caravan power. Download the free app to take control over your caravan in the palm of your hand. Moreover, for caravan models built in 2020 or later, pair a range of Bluetooth sensors SmartConnect to monitor tyre pressure, gas level in the propane gas bottles, and temperatures (for example, temperature in the fridge, freezer or in the living areas).
THE ODYSSEY GIVES USERS A NEW LEVEL OF COMFORT AND KNOWLEDGE ABOUT THE CARAVAN'S BATTERY AND POWER CONSUMPTION INCLUDING:
- Full visibility and control of the caravan's battery system including battery status, power consumption and available charge sources
- Monitoring of clean and dirty water tanks and caravan temperature
- Control of caravan features, including lights, slide-out and water pumps
- Monitoring a range of Bluetooth connected sensors
- Connect and monitor multiple 12V appliances
- Opportunity to adjust the display to your caravan configuration
With the 12V power management system Odyssey, travel to the yet unseen destinations backed up by the smart Australian designed and manufactured technology.
FEATURES
- Adjustable height - Use it as a cooking table, dinner table or extend to maximum height to use as a bar table!
- All four legs are adjustable to allow for uneven ground
- Aluminium tabletop with embossed Navigator logo
- Steel frame in Navigator blue
- Tabletop dimensions 93cm x 70cm
- Min height 75cm / Max height 101cm
- Mesh basket included which hangs underneath to store miscellaneous items
- Folds into a compact rectangle and packs into carry bag (included) 75cm x 29cm x 17cm
- Weight - 8.3kg
Now with Intrusion Detection as a standard.
WiTi offers Australia the most advanced anti- theft system for caravans or trailers with electric brakes for peace of mind.
WiTi Anti-Theft is sensitive to movement, in the event an attempt is made to steal a caravan or trailer the alarm will sound, the lights will flash and the brakes will lock, immobilising the caravan or trailer. Now including Intrusion Detection with supplied Wireless PIR motion sensor and Wireless Magnetic Door Switch.
The WiTi Wireless Brake Controller plugs into a standard 12V cigarette lighter socket and includes an LCD screen and a dial for gain adjustment and manual override.
The WiTi Wireless Brake Controller is a proportional controller that applies braking to the caravan or trailer in proportion to the rate of deceleration plus it offers two significant safety innovations - Hill Descent Assist and Brake Smooth-ing.
WiTi Wireless Towing Interface replaces the cables and plugs connecting a tow vehicle and trailer with an advanced wireless interface. WiTi transmits all lighting and braking signals wirelessly. Although wireless, WiTi is not dependant upon the Internet and communication is point to point between the vehicle unit and trailer unit.
WiTi Wireless Towing Interface supports all CanBus vehicles and vehicles with advanced electronics for example, VW Amarok & Toureg, Ford Ranger, Land Rover Discovery, Dodge RAM, Ford F150 and others.
Australian owned and designed, the Global SAR100 rollout manual awning range from Global Heritage combines a contemporary design with industry leading materials that are reliable for your adventures.
Features:
- Heavy gauge, high performance fabric
- Robust aluminium cast red latches and catches
-Rafter knobs with thread locking to avoid losing the rafter knob ever again
- 3 step travel locking system
- Pulley Strap and Recovery wand
- Strong aluminium cross section and thick gauge roller tube
- Awning is available in a range of sizes- Widths 10" through to 21"
This quick and easy to set up awning will provide that extra space needed and allow you to enjoy the great outdoor views our country has to offer.
Why a Global Awning?
Always with the next generation in mind Global have combined a robust designed awning with highly recyclable aluminium ensuring a minimal impact on the environment without compromising the durability or quality needed by adventurers.
With its considered design, trouble-free operation and superior construction this awning will be every Australian RV enthusiasts' number one choice.
*Not Included: Hardware Kit.
Hardware to suit, purchase seperately
- AWN ARM SET Short Black 1.4M- SAA114SH0049
- AWN ARM SET Standard Black 1.6M- SAA116ST0050
- AWM ARM SET Tall Black 1.9M- SAA119TA0051
Experience the ultimate caravan upgrade with the European designed RoofSTAR 4 Roof Hatch! Its robust build and compact design offer versatility in any weather. Rain or shine, experience the outdoors in comfort with its three adjustable positions. Enjoy fresh air while darkening and fly screens keep you cool and insect-free. Unleash the spirit of adventure and elevate your caravan experience to new heights with RoofSTAR 4!
Unique Features:
Operation: 3x positions, up to 60 degrees opening angle
Small footprint but large opening
Roller blind system: Effective darkening
Integrated LED lights
Aerodynamic low profile, spoiler seal, low noise
Robust materials: Moulded PMMA glazing, ASA body, high UV resistance & Light weight
Integrated ventilation (150cm2)
Certified to Australian Design Rule #8 : Safety Glazing Material
*Please select 1 of the kits below with the hatch dependent on the roof thickness you are fitting the hatch to.
[RS4-AUS-1-KIT] RS4 fixing kits 25-28 mm with screws
[RS4-AUS-2-KIT] RS4 fixing kits 29-32 mm with screws
[RS4-AUS-3-KIT] RS4 fixing kits 33-36 mm with screws
[RS4-AUS-4-KIT] RS4 fixing kits 37-39 mm with screws
[RS4-AUS-5-KIT] RS4 fixing kits 40-44 mm with screws
Experience the ultimate caravan upgrade with the European designed RoofSTAR 4 Roof Hatch! Its robust build and compact design offer versatility in any weather. Rain or shine, experience the outdoors in comfort with its three adjustable positions. Enjoy fresh air while darkening and fly screens keep you cool and insect-free. Unleash the spirit of adventure and elevate your caravan experience to new heights with RoofSTAR 4!
Unique Features:
Operation: 3x positions, up to 60 degrees opening angle
Small footprint but large opening
Roller blind system: Effective darkening
Integrated LED lights
Aerodynamic low profile, spoiler seal, low noise
Robust materials: Moulded PMMA glazing, ASA body, high UV resistance & Light weight
Integrated ventilation (150cm2)
Certified to Australian Design Rule #8 : Safety Glazing Material
Experience the ultimate caravan upgrade with the European designed RoofSTAR 4 Roof Hatch! Its robust build and compact design offer versatility in any weather. Rain or shine, experience the outdoors in comfort with its three adjustable positions. Enjoy fresh air while darkening and fly screens keep you cool and insect-free. Unleash the spirit of adventure and elevate your caravan experience to new heights with RoofSTAR 4!
Unique Features:
Operation: 3x positions, up to 60 degrees opening angle
Small footprint but large opening
Roller blind system: Effective darkening
Integrated LED lights
Aerodynamic low profile, spoiler seal, low noise
Robust materials: Moulded PMMA glazing, ASA body, high UV resistance & Light weight
Integrated ventilation (150cm2)
Certified to Australian Design Rule #8 : Safety Glazing Material
Experience the ultimate caravan upgrade with the European designed RoofSTAR 4 Roof Hatch! Its robust build and compact design offer versatility in any weather. Rain or shine, experience the outdoors in comfort with its three adjustable positions. Enjoy fresh air while darkening and fly screens keep you cool and insect-free. Unleash the spirit of adventure and elevate your caravan experience to new heights with RoofSTAR 4!
Unique Features:
Operation: 3x positions, up to 60 degrees opening angle
Small footprint but large opening
Roller blind system: Effective darkening
Integrated LED lights
Aerodynamic low profile, spoiler seal, low noise
Robust materials: Moulded PMMA glazing, ASA body, high UV resistance & Light weight
Integrated ventilation (150cm2)
Certified to Australian Design Rule #8 : Safety Glazing Material
Experience the ultimate caravan upgrade with the European designed RoofSTAR 4 Roof Hatch! Its robust build and compact design offer versatility in any weather. Rain or shine, experience the outdoors in comfort with its three adjustable positions. Enjoy fresh air while darkening and fly screens keep you cool and insect-free. Unleash the spirit of adventure and elevate your caravan experience to new heights with RoofSTAR 4!
Unique Features:
Operation: 3x positions, up to 60 degrees opening angle
Small footprint but large opening
Roller blind system: Effective darkening
Integrated LED lights
Aerodynamic low profile, spoiler seal, low noise
Robust materials: Moulded PMMA glazing, ASA body, high UV resistance & Light weight
Integrated ventilation (150cm2)
Certified to Australian Design Rule #8 : Safety Glazing Material
This Eberspächer Hydroplate system is a continuous flow hot water service suitable for various applications and uses for installation into Motorhomes, Caravans, Campers just to mention a few.
It utilizes either the existing Vehicle Diesel tank or fuel can be supplied by a designated tank. 12v low amp draw manages the units operation to provide a constant 40°C out of the heat exchanger based on a flow rate between 5-10 litres per minute.
In addition, the Hydroplate has an optional air heating matrix that can be fitted to supply air heating to the desired temperature, thereby providing a complete off grid Hot water and air heating solution.
Features:
Kit inclusion:
1.7Kw FAN COIL WITH HIGH & LOW SPEED FAN.
BLACK FACIA.
4 METERS 16mm WATER HOSE
ALL RELATED S/STEEL CLAMPS
RELIEF GRILL
MANUAL THERMOSTAT
THERMOSTAT WIRING DIAGRAM
This is the RV-3 Lite. It is built and tested for rugged conditions and being lighter, it is the perfect option for young and growing families. Built around the famous 30 Second Oztent frame, you can set up and pack down in less than 30 seconds. Less fuss, more relaxation. The RV-3 Lite features a large attached awning, comes with a fly and 2 x 2.2m awning poles. The tent material is CPAI-84 fire rated and UPF50+ certified.
Once you've set up camp and started the fire, it is time to sit back, grab a cold drink and put your feet up. The Sidekick ticks all the boxes - it can be used as a fishing stool, a footrest, a small table or even somewhere to put your portable fridge. The Oztent Sidekick can achieve all this through a clever transforming design. The hard side-flap folds out of the way for use as a stool or footrest, or can be secured to the top of the Sidekick to convert it into a stable surface to place your fridge or other camping gear.
The Sidekick is made with a steel frame and is weight rated to 110kg. Not only that, but due to its design, when you fold down your Sidekick it is only about 7cm wide, so you can easily find space to fit it in for any trip!
The Oztent Koala HotSpot Lounge chair is the ultimate in luxury camp chairs for all seasons. It boasts Oztents patented Hotspot technology and enjoys an incredible passive heating experience for those cold days by slipping in your HotSpot pouch. It also incorporates our lumbar support system and is made with a super high- quality construction using luxurious 600D diamond ripstop polyester that is fully padded with a massive weight rating of 200Kg.
You have an insulated drink and phone holder on one side and two mesh pockets on the other to store your other goodies. Then in the front we have added a hidden under seat pocket.
Features:
Adjustable lumbar support
Ultra Lightweight
Soft comfort-forming armrests
200kg weight rating
Headrest for carry bag storage
Features:
Steel construction for added strength
Bi-folding mechanism
Packs small
150kg (331lb) load weight
The Oztent Side Table is a much-needed addition to the humble camp chair. This adjustable table gives you a surface to put your dinner on, read a book on or simply somewhere to rest your drink.
The swivel mechanism gives you the ability to angle the table however you would like. You can also easily adjust the height.
The Oztent Side Table will attach to ANY camp chair with a 19mm straight leg.
Oztent is known for making camping easier by making the highest quality and most innovative products.
The new Oztent Camper Cupboard is no exception to this. You can now store all of your goods and food safely in no time at all. The easy lock and release mechanisms make for super fast setup and pack down with no fuss!
The Malamoo Teepee 6 is a classic tent design with lots of features. The single-pole means easy setup and will give your tent 250cm in height and the octagonal floor, which is 350cm wide, will give you heaps of useable space. The extra-large door and windows ensures maximum comfort. The Malamoo Teepee 6 packs down into a compact carry bag and is very easy to set up and extremely comfortable to use. Perfect for family camping or music festivals.
Giant tread area for maximum safety. Each Step is designed large feet for extra safety.Highly skid resistant upper tread surface for maximum safety in both dry and wet conditions.This is highly innovative, durable and high quality.
An Milenco original patented design.
Fitted with 4 rubber feet to prevent skidding on asphalt and peg holes for use on grass.
The MGI Milenco extra safe steps meet strict safety guidelines (EN1645 and EN1646) to ensure criteria such as the ability to safely carry a load of 200KG and a tread that is non-slip, even when it is wet.
The MGI Milenco extra safe steps are produced using 100% recycled plastic, to minimise the environmental impact.
The tailored, non-breathable Dometic Tailgater Air awning footprint can sit beneath the groundsheet, protecting the awning. Pitch your awning anywhere and rest assured that the bottom of the tent won't get damaged when you have the extra layer underneath. Use it in conjunction with the durable fleece carpet to add comfort to the interior space.
Tough non-breathable tent footprint keeps your awning clean and protected when pitching on wet ground.
Dometic Element Large Camping Table, 2 Year Warranty.
The Dometic Element Table Large is a camp table you will be able to rely on and use anywhere. The legs can be easily adjusted to suit the levels required on the ground, ensuring you will always have a stable table. The resin tabletop is lightweight and water-resistant, with an aluminium frame and can hold weight up to 30 kg. When not in use, you can fold the legs up and store it away. It's the perfect table for couples and groups who need a versatile table for everywhere they go.
Dometic Guv'Nor Camping Armchair, 2 Year Warranty.
The Dometic Guv'nor Armchair is a strong camp chair that can be easily carried and set up anywhere. Take it to your local event, a friend's BBQ or away on your next camping trip. It folds up easily and can be put into the carry bag to make it easy to transport and store. When in use, the carry bag can be stored in the pocket, which doubles as a cushioned headrest. The fabric is made from durable 600D polyester that is strong and comfortable. Your back will be supported, and your arms can rest comfortably on the rigid armrests. This versatile armchair will be a reliable go-to for your camping bundle or weekend adventures.
Dometic Dream XL Stretcher Camping Bed, 1 Year Warranty.
The Dometic Dream XL Stretcher is the perfect option if youre looking for an extra wide and sturdy off ground bed for sleeping. By being off the ground, there's no need to worry about the type of surface you've set up the tent on. Not only is it easier to get in and out of, there's more air circulation underneath, meaning it is a cooler option in warm weather and the space under the stretcher can be used for storage. This stretcher will provide adequate support and comfort for a good night's sleep when camping. The Dream XL Stretcher is a large size at 205 x 78.5 x 51 cm with a loading capacity of up to 120 kg. It is quick and easy to set up, without having to pump up like an air mattress. It's just as easy to fold and store away in the included carry bag.
Dometic Daydream 6 Air Inflatable Camping Tent, 6-Person, 3 Year Warranty.
The Dometic Daydream 6 AIR package provides ultimate comfort on your family camping holiday. This inflatable tent will impress with its generous space and how easy it is to set up and pack down. The Dometic Daydream 6 AIR is an inflatable tent designed with AirFrame technology for faster and easier set up without poles. Constructed with durable, lightweight, UV protected and weather-resistant Weathershield™ 68D material, you will be sheltered from the elements. The enclosed front entrance offers a practical area for creating a large indoor space when the weather is inclement and a large open porch when it's pleasant. Multi-level ventilation points combine with the darkened inner tent to regulate the interior temperature, increase airflow and guarantee a good night's sleep. Each tent package comes as standard with a fitted carpet and footprint. Whether you are planning a long holiday or an unforgettable weekend experience, Dometic has a tent to suit.
The Orifa Fuel Tank is built from heavy duty materials and equipped to store petrol and diesel fuels.
DOMETIC CFX3 25 PORTABLE FRIDGE/FREEZER 25 LITRE
The Power to be present:
With the Dometic CFX3, you have control of your outdoor experiences like never before. The CFX3 gives you the power to change your state of mind and put your well-being first.
On-road, off-road, outback or in the backyard, your ordinary and extraordinary adventures will be fuelled by fresher, safer food, less waste and more confidence, giving you the power to be present in any moment.
USER-FRIENDLY INTERFACE:
Weatherproof high-resolution user interface displays operating status;
Easy-to-read high-resolution colour display and soft touch buttons enabling seamless control and monitoring of
fridge/freezer performance.
RUGGED CONSTRUCTION:
Heavy-duty yet lightweight ExoFrame construction with fender frame and protected edges, protect the unit from damage.
EFFICIENT POWER CONSUMPTION:
Optimised VMSO3 compressor cooling technology efficiently refrigerates and deep-freezes to -7°C;
Active gasket technology provides a superior seal to retain cool air and minimise power consumption.
CONVENIENT CFX3 APP:
Allows temperature control and monitoring via Bluetooth or WiFi and provides performance history.
BATTERY: 3-Stage battery protection system prevents dead car battery or allows deep draw on dual batteries
FLEXIBLE POWER OPTIONS: Powered by AC, DC and solar
EASY TO CARRY: Strong aluminium alloy carry handles
STORAGE CAPACITY: Generous storage capacity of 25L
WARRANTY: 3 Year Manufacturer + 2 Year Compressor Warranty
FEATURES:
- Capacity: 15 cans / 19L
- Thick PU insulation keeps ice frozen for days
- Large, leak-proof drain makes cleaning easy
- Rugged construction with one-piece rotomolded PE
- Deep-freeze lid seal ensures no gaps for air to enter or escape
- One-handed rubber latches for convenient opening and closing of the lid
- Now available in the fresh Ocean blue colour.
- Dimensions: 14.9" H x 20.7" W x 14" D
FEATURES:
- Patented UES (Universal Energy Selection) control system that is switchable between
manual (MES) and automatic energy select (AES)
- Same cut out size as most 3 cubic ft models but 10% bigger inside
- User friendly control panel featuring LED indicator lights
-Generous door and wall insulation for greater performance
- Includes hinge kit to easily change the door's opening direction
- Easy access to internal freezer compartment
The incredibly lightweight Dometic CPB101 portable gas BBQ boasts a high heat output of 11.5 MJ/h, powerful enough for all your cooking needs. A spacious cast iron cooking plate and grill with a high dome lid ensure you can feed family and friends at the campsite, outside your caravan or at the beach.
Take your outdoor adventures to a new level with the Dometic CFX3 SLD3545 fridge slide. Access all of your favorite food and beverages from the back of your RV, van, truck, SUV, camper trailer, or boat with ease thanks to the fully extending slide rail. Made from robust materials, the CFX3 SLD3545 can carry an impressive load, up to 220 lbs or 100 kg at a time. The rugged latching system ensures that rattling noises while driving are minimized while maximizing stability and security of your powered cooler. Each CFX3 fridge slide comes with tie-down straps and mounting bolts for a choice of quick removal or semi-permanent installation of the CFX3 to the slide. Go further, experience more.
This fridge slide is designed to fasten theCFX3 35/45, CFX 35W/40W, CFF45, and CF-40/50 portable fridge and freezers into vehicles and allows easy slide out access to the fridge. It keeps the fridge secure and makes it convenient for loading and unloading. Ball Bearing rollers that allows the fridge to easily slide in and out of your vehicle for quick access to the fridge contents.
FEATURES:
Suitable for use with CFX3 35, CFX3 45 and legacy CFX models of comparable size
Maximum load capacity of 100kg
Can be fully extended for easy access to fridge contents
Rugged latching system reduces rattling noise while driving
Dust cover keeps sand and dirt out of slide rails
Optimized design avoids adding unnecessary weight to the vehicle
Comes complete with tie down straps and M6 bolts
FEATURES:
- Keeps drinks cold for 12hr, hot for 6hr
- Perfect for Wine, Tea, Coffee
- Slide-open lid with double silicone seal
FEATURES:
- Double wall insulated
- Lid with closure
- BPA Free
FEATURES:
- Vacuum insulated - slide lid
- Hot for 6 hours, cold for 12 hours
- Bottom circumference width of the 5 o'clock is 7cm
FEATURES:
- Vacuum insulated - slide lid
- Hot for 6 hours, cold for 12 hours
- Bottom circumference width of the 5 o'clock is 7cm
FEATURES:
- Leak-proof lid with seal
- Ideal for wine, tea, coffee, mixers and water
- Cold for 24 hours
FEATURES:
- Keeps drinks cold for 12hr, hot for 6hr
- Slide-open lid with double silicone seal
- Perfect for wine, tea, coffee
FEATURES:
- Keeps drinks cold for 12hr, hot for 6hr
- Slide-open lid with double silicone seal
- Perfect for wine, tea, coffee
eTOURER C1 E-Bike Urban Model - Metallic Orange
The eTOURER C1 is our electric Urban Bike variant, it comes with 26" x 2.1" rear driven, anti-puncture Kenda tyres and is powered by a 36V 10Ah Beyonder Power Lithium-ion battery. The eTOURER C1 offers these great features:
- 7 gear Shimano Acera
- Shimano derailleur
- Shimano Cassette
- SR- Suntour NEX Adjustable Suspension
- Spanninga LED
- Velo Comfort Handgrips
- Zoom sports handle bar and stem
- SR Freeway sink gel soft comfort saddle
eTOURER F1 Folding E-Bike Std Model - Matt Black
The eTOURER F1 is our Folding electric bike variant, it comes with 20"x 2.125" front driven, Kenda tyres and is powered by a 36V 7.8Ah Samsung Lithium-ion battery. The eTOURER F1 offers these great features:
- 3 gear Shimano Nexus
- Shimano derailleur
- Shimano Cassette
- Spanninga LED
- Velo Comfort Handgrips
- SR Lookin sink gel soft comfort saddle
eTOURER M1 E-Bike MTB Model - Black
Product Description The eTOURER M1 is our electric Mountain Bike variant, designed to tackle tough terrain it is perfect for adventure seekers and enthusiasts. It comes with 27.5" x 2.1" rear driven, anti-puncture Kenda tyres and is powered by a 36V 13Ah Samsung Lithium-ion battery. The eTOURER M1 electric mountain bike offers these great features:
- 7 gear Shimano Acera
- Shimano derailleur
- Shimano Cassette
- SR- Suntour XCM Adjustable Suspension
- Spanninga LED
- Velo Comfort Handgrips
- Zoom sports handle bar and stem
- SR Lookin sink gel soft comfort saddle
Features:
- Gimbaled design
- 12/24 Volt Auto-sensing capability
- Improved switch control layout
- Three Speeds
- Four preset timer settings (3/6/9 or 12 hours)
- Ultra quiet long-life motor with low power draw
- Mounting footprint matches first generation Sirocco
- Space friendly design
- Made in Canada
- Works on all types of boats
- Allows the fan to be folded flat against the bulkhead when not in use
- Easy to install
Features:
- Gimbaled design
- 12/24 Volt Auto-sensing capability
- Improved switch control layout
- Three Speeds
- Four preset timer settings (3/6/9 or 12 hours)
- Ultra quiet long-life motor with low power draw
- Mounting footprint matches first generation Sirocco
- Space friendly design
- Made in Canada
- Works on all types of boats
- Allows the fan to be folded flat against the bulkhead when not in use
- Easy to install
The Eberspächer Airtronic 2.2kw diesel air heater offers cosy warmth in your vehicle during the day and night, at every stage of your journey. It is a compact and economical heater, providing optimised fuel efficiency, which will save you power and money. You can easily programme the heater to deliver hot blown air until the desired temperature is achieved.
Interfaces: CAN, LIN (only 12 V), S+
Brushless motor
Service life 5,000 h
EasyStart Pro controller with integrated fault diagnostic tool.
Starting capability down to –40 °C
Stepless heating performance control
Noise emissions optimised
Use of acoustically improved metering pump
Integrated altitude sensor: Automatic altitude adjustment up to 3,000 m
Optimised combustion
Factory assembled components for easy "Plug and Play" installation. The kit premium kit includes;
12V Eberspacher Heater unit
Easy Start controller
Cool-air intake vent
Warm-air outlet vent
2m of 60mm ID ducting
Floor mounting bracket
8m fuel line
2m Stainless exhaust pipe & muffler
Combustion intake pipe
Bag of mounting hardware
NOTE: This requires a fuel standpipe or fuel tank that is not included.
FEATURES:
- Heavy Duty Hinge
- Grey Color
- 3 x Screws included
Lid latch to suit the Dometic / Waeco CF-80 and CF-110 portable refrigerators
How easy is this!
Detach and position the awning leg vertically, simply slip the Awning Anchor Plate over the bar on the foot of the awning leg. Once in place, screw a Ground Dog screw in peg with orange Wing Collar into each hole of the anchor plate, using a drill driver with the 19mm socket provided, or your stabiliser leg hand crank.
To provide extra anchoring for very windy conditions or when your awning legs are attached, the kit also contains two High-Viz Tie-down Straps with Metal Cam Buckles & two Retaining Clips to stop that annoying strap end piece from flapping around!
Another innovation is the rubber Safety Springs made from strong and weather resistant EPDM rubber compound. The Safety Spring is designed to replace those dangerous metal springs, and a great idea if you have kids running around. They are easily attached to the Tie Down Straps and click into the Hook Collar of the Ground Dog screw in pegs.
The Roll Out Awning Anchor kit
Included in the Rollout Awning Anchor Kit:
The benefit of a vertical awning leg is that it gives a clear walkway around the caravan, there is no need to duck under diagonal awning legs. A vertical awning leg also gives a better view to appreciate the surrounding area and most of all - NO more awning arm to hit your head on, and NO tie down rope to trip over!
Features:
- Gimbaled design
- 12/24 Volt Auto-sensing capability
- Improved switch control layout
- Three Speeds
- Four preset timer settings (3/6/9 or 12 hours)
- Ultra quiet long-life motor with low power draw
- Mounting footprint matches first generation Sirocco
- Space friendly design
- Made in Canada
- Works on all types of boats
- Allows the fan to be folded flat against the bulkhead when not in use
- Easy to install
Features:
- Cradle head to support awnings with roll bars
- Stabiliz'r Grip head to allow securing to a box awning
- Poles feature crank knobs to secure the pole to the adjusted height
- Comes with stakes and straps to secure the poles to the ground and awning.
- Designed for quick set up, under 5 minutes!
Important!
When using this kit with Altitude awnings, or any powered awning, ensure that the awning's power is switched OFF prior to installation! This prevents any sensors the awning has from activating and causing it to retract. If you need to adjust the awning pitch after set up, loosen the pole's straps and lower before adjusting.
The Screen House Walls are designed to give you extra protection when using your Oztent Screen House and Screen House Hex. They easily velcro to any side of the Screen House to act as a wind or rain break.
Dometic SKA Wind Deflector for the Dometic Slide Out Kitchen. Designed and manufactured in Australia.
Its lightweight, aluminium design allows sturdy and simple protection from the wind for the hobs.
Clips into the SOK accessory bracket for quick swapping of accessories.
The ventilation hole has changed from earlier models to provide a better seal. The part that actuates the ventilation connection is a removable white part on the toilet base. This part is included with new cassettes.
Optionally you may remove the ventilation outlet from the old tank and place it in the new tank by rotating 45 degrees. However this will not improve the ventilation seal.
Suits: Dometic CTS-3110* and CTS-4410 Cassette Toilets (*CTS-3110 is the previous model to the CTS-4110)
This genuine Dometic part allows you to run your Dometic / Waeco portable fridge from a 240V AC power source.
Suits : CFX, CF and CR series fridges
The Navigator Awning Buddy has two awning straps that are made to fit into the sail track on caravan awnings and most 4WD awnings.
Bleeding instructions using Sensabrake Pressure Bleed Gun
1. Fill reservoir with clean brake fluid to just below the top of the sight glass.
2. Place the pressure bleed gun socket gently over the neck of the reservoir applying gentle pressure to locate the bleed socket place.
3. Screw the lid in place to secure the socket.
4. Do not push on with excessive force or damage may be caused to the reservoir or the 0 ring on the pressure bleed gun socket.
5. Place the other end of the bleed gun tube into a bottle or container of fresh, new brake fluid.
6. Open the bleed screw (start with the furthermost calliper) at least one full turn. Place a clear flexible hose over the bleed screw and immerse the other end into a container partially filled with brake fluid.
7. Squeeze the pressure bleed gun repeatedly (but not too fast or cavitations may occur) ensuring that the bulk brake fluid tank and the reservoir do not run out of brake fluid or air will enter the hydraulic system. At no stage let the fluid level in the reservoir fall below the minimum fluid level indicator.
8. Continue squeezing the pressure bleed gun until the brake fluid in the flexible hose attached to the bleed screw is free of air bubbles and tighten the bleed screw.
9. Repeat the process with the next furthermost calliper away from the actuator.
10. Bleed the other side of the trailer starting with the closest calliper to the actuator first as above
11. Connect the trailer to the tow vehicle and turn on ignition to activate actuator. Allow the compressor to fully charge the actuator (approx 90 seconds). Once the compressor has stopped apply the brakes, and hold on for a 5 second period and release. Repeat this 4 times.
12. Check the brake fluid level in the reservoir. It should not exceed the top of the sight glass maximum level.
13. Replace the fluid reservoir cap.
Awning Hooks give you extra hanging space under your awning
The Awning Hooks are a perfect solution to hang items from most awnings. The Awning Hooks are lightweight and easy to slide into the sail track.
Best suited to caravan and RV Awnings , but NOT suitable for Fiamma or most car mounted awnings.
It is recommend that you hang only light to medium weight items from your awning.
Features:
Easy to slide into track
Hole to insert coat hanger
Hooks for hanging small items
Durable plastic
Lightweight and easy to store
© 2022 Shop RV Parts Australia. All Rights Reserved
