We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
FEATURES:
- Condensation Free
- Up to 5 times colder in 1 hour compared with a normal stubby holder
- Fits: Cans - 355/375ml, Bottles 330/345/355/375ml
FEATURES:
- Keeps drinks cold for 12hr, hot for 6hr
- Slide-open lid with double silicone seal
- Perfect for wine, tea, coffee
FEATURES:
- Keeps drinks cold for 12hr, hot for 6hr
- Slide-open lid with double silicone seal
- Perfect for wine, tea, coffee
FEATURES:
- Cold for 12 hours, hot for 6 hours
- Vacuum insulated, sip-through lid, condensation free
- 8mm bent stainless steel straw
FEATURES:
- Cold for 12 hours, hot for 6 hours
- Vacuum insulated, sip-through lid, condensation free
- 8mm bent stainless steel straw
FEATURES:
- Leak-proof lid with seal
- Ideal for wine, tea, coffee, mixers and water
- Cold for 24 hours
FEATURES:
- Double wall insulated
- Lid with closure
- BPA Free
FEATURES:
- Vacuum insulated - slide lid
- Hot for 6 hours, cold for 12 hours
- Bottom circumference width of the 5 o'clock is 7cm
FEATURES:
- Vacuum insulated - slide lid
- Hot for 6 hours, cold for 12 hours
- Bottom circumference width of the 5 o'clock is 7cm
FEATURES:
- Double wall insulated
- Lid with closure
- BPA Free
FEATURES:
- Keeps drinks cold for 12hr, hot for 6hr
- Perfect for Wine, Tea, Coffee
- Slide-open lid with double silicone seal
Klamp It Wheel Clamp range is manufactured to the standard needed to receive the 'stamp of approval' from the insurance industry and leading motoring organisations.
Klamp It is designed for Australian conditions, using premium materials and finished in durable and highly visible gloss power coat. The circular steel plate protects wheel nuts from access and the clamp grips the tyre, preventing movement. This double action security is secured with a high security built in push lock for total security. Built-in push lock, comes with 2 keys. Suitable for marine, trailer, caravan, small to large cars, 4WDs and golf carts.
Klamp It Wheel Clamps are a bold visual deterrent to thieves and are user friendly and can normally be fitted in just 30 seconds.
Clearance between the tyre and the wheel arch needs to be about 40mm. To check, get a tape measure and pull out 40mm. Next, hold it around the top edge of the tyre between it and the wheel arch as shown here. Standard vehicles rarely lack clearance, however modified cars might if they have been lowered.
FEATURES:
- Highly Visual, deters thieves from approach
- Easy To Install Or Remove In Seconds
- Prevents Access To Wheel Nuts
- Heavy Duty Security Clamp And Keylock
- Australia's Leading Wheel Clamp
- 12 Month Warranty
Bleeding instructions using Sensabrake Pressure Bleed Gun
1. Fill reservoir with clean brake fluid to just below the top of the sight glass.
2. Place the pressure bleed gun socket gently over the neck of the reservoir applying gentle pressure to locate the bleed socket place.
3. Screw the lid in place to secure the socket.
4. Do not push on with excessive force or damage may be caused to the reservoir or the 0 ring on the pressure bleed gun socket.
5. Place the other end of the bleed gun tube into a bottle or container of fresh, new brake fluid.
6. Open the bleed screw (start with the furthermost calliper) at least one full turn. Place a clear flexible hose over the bleed screw and immerse the other end into a container partially filled with brake fluid.
7. Squeeze the pressure bleed gun repeatedly (but not too fast or cavitations may occur) ensuring that the bulk brake fluid tank and the reservoir do not run out of brake fluid or air will enter the hydraulic system. At no stage let the fluid level in the reservoir fall below the minimum fluid level indicator.
8. Continue squeezing the pressure bleed gun until the brake fluid in the flexible hose attached to the bleed screw is free of air bubbles and tighten the bleed screw.
9. Repeat the process with the next furthermost calliper away from the actuator.
10. Bleed the other side of the trailer starting with the closest calliper to the actuator first as above
11. Connect the trailer to the tow vehicle and turn on ignition to activate actuator. Allow the compressor to fully charge the actuator (approx 90 seconds). Once the compressor has stopped apply the brakes, and hold on for a 5 second period and release. Repeat this 4 times.
12. Check the brake fluid level in the reservoir. It should not exceed the top of the sight glass maximum level.
13. Replace the fluid reservoir cap.
The "drop down" corner steady requires only a small amount of lowering to steady the caravan and can be swung from the horizontal travelling position to a number different angles including the optimum position of vertical.
The AL-KO Big Foot fitted to this drop down corner steady will be found fitted to most caravans/trailers on the Australian Market. This unique product provides the corner steady with a flat load bearing surface, ideal for soft ground. No more carrying around pieces of wood to put under the corner steady on soft ground!
This corner steady has a maximum length of 590mm and is Zinc plated for corrosion resistance.
The incredibly lightweight Dometic CPB101 portable gas BBQ boasts a high heat output of 11.5 MJ/h, powerful enough for all your cooking needs. A spacious cast iron cooking plate and grill with a high dome lid ensure you can feed family and friends at the campsite, outside your caravan or at the beach.
Dometic Slide Out Kitchen, 3 Burner / Sink / Benchtop, 1 Year Warranty
Designed and manufactured in Australia, the Slide Out Kitchen provides great functionality giving you seperate areas for cooking, cleaning, washing and serving.
Not only does the Dometic Slide Out Kitchen save valuable space in the kitchen area of your RV, its telescopic runners make it quick and easy to pull-out and stow away after use. It provides all the kitchen essentials: a sink, double-side access storage, three-burner cooktop, chopping board and serving bench.
The kitchen's modular aluminium construction makes it 40% lighter, while a large amount of built-in storage keeps dining and cooking equipment safe and secure. Easy to install on most RVs thanks to its simple three-step installation method, the Slide Out Kitchen takes cooking outdoors to new levels of convenience!
FEATURES:
- Dedicated area for cooking, cleaning, chopping and serving
- Lightweight aluminium construction- Easy 3-step installation process
- Compatible with all popular access doors
- Large dual side storage compartment
- Delivered ready-to-install
- Range of accessories available, including a chopping board, and utensil holder
© 2022 Shop RV Parts Australia. All Rights Reserved