We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
To install: Start to Splay the rivet end with a hole punch (or bevel the end of an old screw driver to 45degrees). Once started to splay, it will continue with taps by a hammer, while the rear is against something solid.
Carefree awning Lift Handle. Lift handle to lengthen and lock arms for Fiesta and SPIRIT or Simplicity Carefree rollout awnings. These hold the awning arms at the required length when awning is in use.
Fitting Instructions:
- Fully extend the awning out.
- Undo the screw holding the cap to the arm. DO NOT BUMP THE LEVER!
- Slide the remote lock down the channel which will now be exposed.
- Put the cap back onto the arm.
- Carefully slip the top of the remote over the ratchet lever.
- More details if needed are on page 8 of the service manual.
Note: Suits Carefree Fiesta / Spirit FX Awnings. Carefree Part Number: 901046W
Features:
- Cradle head to support awnings with roll bars
- Stabiliz'r Grip head to allow securing to a box awning
- Poles feature crank knobs to secure the pole to the adjusted height
- Comes with stakes and straps to secure the poles to the ground and awning.
- Designed for quick set up, under 5 minutes!
Important!
When using this kit with Altitude awnings, or any powered awning, ensure that the awning's power is switched OFF prior to installation! This prevents any sensors the awning has from activating and causing it to retract. If you need to adjust the awning pitch after set up, loosen the pole's straps and lower before adjusting.
Carefree's new Straight Rafter is a straight rafter designed to add rigidity and further support to your awning. Installing the Straight Rafter is simple and easy. The rafter end simply hooks directly to your awning rail and with the quick turn of the locking knob, the rafter quickly extends to fit snugly against the roll bar. The RV bracket needs to be drilled in against the wall side to fit.
The Straight Rafter also includes an industry first utility slot to quickly hang side blockers, side panels or other awning accessories.
Once you roll up your awning, the pivoting head receives the roller & support it, eliminating weight stress & potential bowing in the centre of your awning roller. The awning supports will not damage the awning fabric. Recommended for use on flat walls (of RV's) & for awning widths of 16ft or greater.
Carefree's new Straight Rafter is a straight rafter designed to add rigidity and further support to your awning. Installing the Straight Rafter is simple and easy. The rafter end simply hooks directly to your awning rail and with the quick turn of the locking knob, the rafter quickly extends to fit snugly against the roll bar. The RV wall bracket needs to be drilled in against the wall side to fit.
The Straight Rafter also includes an industry first utility slot to quickly hang side blockers, side panels or other awning accessories.
Note: Suit Carefree, A&E, Dometic and many other awnings. NOT suitable for Fiamma Awnings.
© 2022 Shop RV Parts Australia. All Rights Reserved