We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
We apologise for any inconvenience our phones are currently down please send emails to info@shoprvparts.com.au in the interim
Contact Us: info@shoprvparts.com.au
String up some shade or seek shelter with our selection of caravan awnings and covers. We have a range of caravan awnings for sale, as well as accessories from brands such as Fiamma, CAMCO, Carefree and Aussie Traveller. Whatever you need, we have it - from brackets and clips to caravan awnings and privacy screens. Browse the selection of caravan awnings below.
These easy to use awnings can be operated by a single person and allow you to double your living space in under a minute to make the most of the outdoors. Fully enclosed in a solid case when stowed and with no hardware running down the side of the vehicle these are great for use on Campervans, Motorhomes or any vehicle with a vertically curved wall. From shade screens & sidewalls to a complete annex solution, Fiamma's incorporated design offers a range of options & accessories to customize your outdoor area.
Set Up
A detachable winder is used to extend the awning. Winding allows the front face of the sturdy case to extend horizontally, like a verandah - pulling the fabric out as it goes. When extended, you then unclip the telescopic legs from within the front face, and they are either pegged to the ground or clipped to base of your RV with the included Lower Leg Brackets.
All awnings come complete with the Standard Bracket Kit which allows the awning to be attached to a vertical face on a Caravan/Motorhome/Gooseneck etc. If the awning is being attached to a curved surface or roof rack you will need to purchase a separate bracket kit OR make a mounting that will accept the Standard Brackets. See section on BRACKETS for options.
Anti-Flap Options
Fiamma offer a range of Anti Flap solution; Straight and Curved Roof Rafters provide extra tension to the canopy, eliminating water pooling and noisy flapping caused by wind.
The Fast Clip system provides the greatest strength and enables full side walls to be added to form a complete enclosed area (this is included in all Privacy Room Kits)
Features:
- Durable Case - Powder coated metal case adds a sleek look to your vehicle while providing extra protection when not in use.
- Double Guide - Allows you to use multiple accessories like Screens, Lights, Storage Organiser's & Tie Down Kits.
- Presto Fix - Enables instant realignment of front bar on closing if needed.
- One Way Drive - Means a perfect close every time.
- Dual Shock Absorber - Protect both your awning and vehicle.
- Extra Strong Arms - Reinforced arms with 3.5mm cable provide a fabric tension up to 32kg.
- Anti-Scratch Canopies - With an anti-scratch coating on both sides of the canopy they are hardwearing and UV-resistant to stop fading.
The Carefree BT-12 Motion Switch is an optional attachment for the Altitude Awning range that is used to detect unwanted motions that may potentially damage your awning, like strong winds. If it detects anything too extreme it will tell the awning to promptly get out of harm's way by automatically retracting - a very helpful bit of insurance!
Important:
If you are using support poles, rafters, or other awning attachments, this could obviously prove a problem if the awning was to start retracting while they were attached. As such, if any additional hardware is used, the Master On/Off switch should be switched OFF once the correct angle and length is set and additional hardware is added.
Carefree awnings are built tough, look great and are suitable for Pop-tops, Caravans and Motorhomes. Quick and easy to set up, they provide extra living space and let you enjoy all that the outdoors has to offer. From privacy screens to complete annexe solutions, the Fiesta Awning is designed to accept a huge a range of accessories to customise your space.
Carefree of Colorado have been manufacturing awnings for over 45 years and has become an industry leader. The Fiesta is a favourite in the Australian market and is commonly fitted by major manufacturers like Jayco. They have been designed intentionally uncomplicated and are built from high quality materials which allow simple and reliable operation.
INSTALLATION
Rollout awnings like Carefree or Dometic require two seperate components to make a complete unit.
1) Awning fabric on the roller - Available in a large range of sizes and colours, however due to transport issue we only supply up to 16ft.
2) Hardware kit - This is the legs and arms that attach to your van. You will need to select the size which will suit your wall style. ie Full height, pop-top or curved.
Measure Correctly -You MUST measure awning length from centreline of legs (See Image) mistakes are costly If this is replacing an existing awning, and you have annex walls, it is essential you measure the extension.
Setup - To set up awning you simply unlock the travel lock and pull the spring loaded awning roller out using the strap. You then extend the legs to achieve your desired roof height, then extend the roof braces to hold the fabric taut. The awning can be used with the legs attached to the base of the RV or they can be released and pegged to the ground.
Not Included:
Hardware Kit. Select a Pop-Top or Caravan Arm/leg and bracket kit separately.
Rope Track - Is NOT available from Caravans Plus but is required for new installations.
Carefree awnings are built tough, look great and are suitable for Pop-tops, Caravans and Motorhomes. Quick and easy to set up, they provide extra living space and let you enjoy all that the outdoors has to offer. From privacy screens to complete annexe solutions, the Fiesta Awning is designed to accept a huge a range of accessories to customise your space.
Carefree of Colorado have been manufacturing awnings for over 45 years and has become an industry leader. The Fiesta is a favourite in the Australian market and is commonly fitted by major manufacturers like Jayco. They have been designed intentionally uncomplicated and are built from high quality materials which allow simple and reliable operation.
INSTALLATION
Rollout awnings like Carefree or Dometic require two seperate components to make a complete unit.
1) Awning fabric on the roller - Available in a large range of sizes and colours, however due to transport issue we only supply up to 16ft.
2) Hardware kit - This is the legs and arms that attach to your van. You will need to select the size which will suit your wall style. ie Full height, pop-top or curved.
Measure Correctly -You MUST measure awning length from centreline of legs (See Image) mistakes are costly If this is replacing an existing awning, and you have annex walls, it is essential you measure the extension.
Setup - To set up awning you simply unlock the travel lock and pull the spring loaded awning roller out using the strap. You then extend the legs to achieve your desired roof height, then extend the roof braces to hold the fabric taut. The awning can be used with the legs attached to the base of the RV or they can be released and pegged to the ground.
Not Included:
Hardware Kit. Select a Pop-Top or Caravan Arm/leg and bracket kit separately.
Rope Track - Is NOT available from Caravans Plus but is required for new installations.
This handy unit allows you to use Bluetooth to control all parts of your awning right from your hand. It also includes a traditional master Combination Switch just in case your phone isn't available or out of battery!
Features:
- Opening and closing the awning
- Turning your LED light bar on and off
- Adjusting the brightness of your LED light bar
- Position the angle of the LED by adjusting the awning
- Using the memory setting to get the exact extension every time
- Do all of this while you're sitting down
REMOTE AND TRAVEL LOCKS
These work together to ensure the Fiesta does not come undone during travel. They eliminate the need for you to stretch and fumble for the roller lock.
CANOPY CLAMPS
Built onto the hardware and self storing. They help to keep your awning taught and provides extra protection from the elements (not available on arms supplied to suit poptops).
HEAVY DUTY BRACKETS
Solid and rugged. The awning hardware and castings are white the trim of any RV.
SINGLE TRACK SLIDER
Located on the inside of the hardware channels, it eliminates the rafter binding during setup and storage. You get a smooth gliding motion as soon as our slide the rafters up the hardware arms.
These easy to use awnings can be operated by a single person and allow you to double your living space in under a minute to make the most of the outdoors. Fully enclosed in a solid case when stowed and with no hardware running down the side of the vehicle these are great for use on Campervans, Motorhomes or any vehicle with a vertically curved wall. From shade screens & sidewalls to a complete annex solution, Fiamma's incorporated design offers a range of options & accessories to customize your outdoor area.
Set Up
A detachable winder is used to extend the awning. Winding allows the front face of the sturdy case to extend horizontally, like a verandah - pulling the fabric out as it goes. When extended, you then unclip the telescopic legs from within the front face, and they are either pegged to the ground or clipped to base of your RV with the included Lower Leg Brackets.
All awnings come complete with the Standard Bracket Kit which allows the awning to be attached to a vertical face on a Caravan/Motorhome/Gooseneck etc. If the awning is being attached to a curved surface or roof rack you will need to purchase a separate bracket kit OR make a mounting that will accept the Standard Brackets. See section on BRACKETS for options.
Anti-Flap Options
Fiamma offer a range of Anti Flap solution; Straight and Curved Roof Rafters provide extra tension to the canopy, eliminating water pooling and noisy flapping caused by wind.
The Fast Clip system provides the greatest strength and enables full side walls to be added to form a complete enclosed area (this is included in all Privacy Room Kits)
Features:
- Durable Case - Powder coated metal case adds a sleek look to your vehicle while providing extra protection when not in use.
- Double Guide - Allows you to use multiple accessories like Screens, Lights, Storage Organiser's & Tie Down Kits.
- Presto Fix - Enables instant realignment of front bar on closing if needed.
- One Way Drive - Means a perfect close every time.
- Dual Shock Absorber - Protect both your awning and vehicle.
- Extra Strong Arms - Reinforced arms with 3.5mm cable provide a fabric tension up to 32kg.
- Anti-Scratch Canopies - With an anti-scratch coating on both sides of the canopy they are hardwearing and UV-resistant to stop fading.
The Carefree BT-12 Motion Switch is an optional attachment for the Altitude Awning range that is used to detect unwanted motions that may potentially damage your awning, like strong winds. If it detects anything too extreme it will tell the awning to promptly get out of harm's way by automatically retracting - a very helpful bit of insurance!
Important:
If you are using support poles, rafters, or other awning attachments, this could obviously prove a problem if the awning was to start retracting while they were attached. As such, if any additional hardware is used, the Master On/Off switch should be switched OFF once the correct angle and length is set and additional hardware is added.
Carefree awnings are built tough, look great and are suitable for Pop-tops, Caravans and Motorhomes. Quick and easy to set up, they provide extra living space and let you enjoy all that the outdoors has to offer. From privacy screens to complete annexe solutions, the Fiesta Awning is designed to accept a huge a range of accessories to customise your space.
Carefree of Colorado have been manufacturing awnings for over 45 years and has become an industry leader. The Fiesta is a favourite in the Australian market and is commonly fitted by major manufacturers like Jayco. They have been designed intentionally uncomplicated and are built from high quality materials which allow simple and reliable operation.
INSTALLATION
Rollout awnings like Carefree or Dometic require two seperate components to make a complete unit.
1) Awning fabric on the roller - Available in a large range of sizes and colours, however due to transport issue we only supply up to 16ft.
2) Hardware kit - This is the legs and arms that attach to your van. You will need to select the size which will suit your wall style. ie Full height, pop-top or curved.
Measure Correctly -You MUST measure awning length from centreline of legs (See Image) mistakes are costly If this is replacing an existing awning, and you have annex walls, it is essential you measure the extension.
Setup - To set up awning you simply unlock the travel lock and pull the spring loaded awning roller out using the strap. You then extend the legs to achieve your desired roof height, then extend the roof braces to hold the fabric taut. The awning can be used with the legs attached to the base of the RV or they can be released and pegged to the ground.
Not Included:
Hardware Kit. Select a Pop-Top or Caravan Arm/leg and bracket kit separately.
Rope Track - Is NOT available from Caravans Plus but is required for new installations.
Carefree awnings are built tough, look great and are suitable for Pop-tops, Caravans and Motorhomes. Quick and easy to set up, they provide extra living space and let you enjoy all that the outdoors has to offer. From privacy screens to complete annexe solutions, the Fiesta Awning is designed to accept a huge a range of accessories to customise your space.
Carefree of Colorado have been manufacturing awnings for over 45 years and has become an industry leader. The Fiesta is a favourite in the Australian market and is commonly fitted by major manufacturers like Jayco. They have been designed intentionally uncomplicated and are built from high quality materials which allow simple and reliable operation.
INSTALLATION
Rollout awnings like Carefree or Dometic require two seperate components to make a complete unit.
1) Awning fabric on the roller - Available in a large range of sizes and colours, however due to transport issue we only supply up to 16ft.
2) Hardware kit - This is the legs and arms that attach to your van. You will need to select the size which will suit your wall style. ie Full height, pop-top or curved.
Measure Correctly -You MUST measure awning length from centreline of legs (See Image) mistakes are costly If this is replacing an existing awning, and you have annex walls, it is essential you measure the extension.
Setup - To set up awning you simply unlock the travel lock and pull the spring loaded awning roller out using the strap. You then extend the legs to achieve your desired roof height, then extend the roof braces to hold the fabric taut. The awning can be used with the legs attached to the base of the RV or they can be released and pegged to the ground.
Not Included:
Hardware Kit. Select a Pop-Top or Caravan Arm/leg and bracket kit separately.
Rope Track - Is NOT available from Caravans Plus but is required for new installations.
This handy unit allows you to use Bluetooth to control all parts of your awning right from your hand. It also includes a traditional master Combination Switch just in case your phone isn't available or out of battery!
Features:
- Opening and closing the awning
- Turning your LED light bar on and off
- Adjusting the brightness of your LED light bar
- Position the angle of the LED by adjusting the awning
- Using the memory setting to get the exact extension every time
- Do all of this while you're sitting down
REMOTE AND TRAVEL LOCKS
These work together to ensure the Fiesta does not come undone during travel. They eliminate the need for you to stretch and fumble for the roller lock.
CANOPY CLAMPS
Built onto the hardware and self storing. They help to keep your awning taught and provides extra protection from the elements (not available on arms supplied to suit poptops).
HEAVY DUTY BRACKETS
Solid and rugged. The awning hardware and castings are white the trim of any RV.
SINGLE TRACK SLIDER
Located on the inside of the hardware channels, it eliminates the rafter binding during setup and storage. You get a smooth gliding motion as soon as our slide the rafters up the hardware arms.
© 2022 Shop RV Parts Australia. All Rights Reserved
